1.
Process Research and Optimization of Φ0.018mm Ultra-fine Stainless Steel Wire Drawing;
Φ0.018mm超细不锈钢微丝生产工艺的开发与优化
2.
Effect of Heat Treatment Process on Deformability of Superfine Fiber of Stainless Steel
热处理工艺对超细不锈钢微丝制备性能的影响
3.
The Representation of the Shape Memory Fabric Containing Stainless Steel Wire
含不锈钢微丝织物形状记忆功能的表征方法探讨
4.
Study on Microstructure and Mechanical Properties of Roll Forming Profiled Stainless Steel Wires Used for Metal Rubber
金属橡胶用异型不锈钢微丝轧制成形对组织性能的影响规律研究
5.
stainless steel wire wrapped scree
不锈钢钢丝绕制筛管
6.
MICROSTRUCTURE AND MECHANICAL PROPERTY OF COLD DRAWN HIGH STRENGTH 00Cr18Ni10N STAINLESS STEEL WIRE
冷拔高强00Cr18Ni10N不锈钢丝显微组织与力学性能
7.
Stainless steel wire ropes
GB/T9944-1988不锈钢丝绳
8.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
9.
cloth wire of iron or steel whether or not stainless
丝布,铁或钢（无论是否不锈钢）制
10.
There were no significant differences of frictional resistance between 0.020 inch stainless steel round wire and 0.019× 0.025 inch stainless steel rectangular wire.
0.020英寸不锈钢圆丝与0.019×0.025英寸不锈钢方丝之间无显著差异。
11.
The center wire is usually of tungsten or stainless steel and is about 0.1 mm in diameter.
中心丝通常是钨丝或不锈钢丝，直径约为0．1毫米。
12.
Development of duplex stainless steel flux-cored wire GDQA2205
双相不锈钢药芯焊丝GDQA2205的研制
13.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型
14.
Stainless Steel/Stainless Steel Standard
不锈钢/不锈钢 标准型
15.
Stainless Steel/Stainless Steel Dome Head
不锈钢/不锈钢 圆头型
16.
Stainless Steel/Steel Dome Head
不锈钢/钢 圆头型
17.
Stainless Steel/Steel Countersunk
不锈钢/钢 沉头型
18.
Stainless Steel/Steel Standard
不锈钢/钢 标准型