1.
Tests for slow crack growth failure in pipe resin
管材树脂耐慢速裂纹增长性能快速评价方法
2.
Effect of Vibration Extrusion on Slow Crack Growth Resistance of HDPE Pipe
振动挤出对HDPE管材耐慢速裂纹增长性能的影响
3.
Slow Crack Growth Resistance of the Polyethylene Pipes Prepared by Mandrel Rotating Extrusion
旋转挤出聚乙烯管的耐慢速裂纹增长性能研究
4.
Influencing Factors on Slow Crack Growth Resistance of Polyethylene Pipe and Countermeasures
聚乙烯管材发生慢速裂纹增长的影响因素及对策
5.
Crack propagation usually begins slowly.
裂纹的增长常常是开始缓慢。
6.
fracture mechanics can be used to determine the conditions in which a rapidly propagating crack can be arrested
断裂力学可用来确定制止裂纹快速扩展的条件。
7.
Research on Creep Crack Growth of Nonlinear Viscoelastic Body;
非线性粘弹性体裂纹扩展速度的研究
8.
RESEARCH OF THE FATIGUE CRACK PROPAGATION CHARACTERISTIC ON RAILWAY HOLLOW AXLES
高速客车空心车轴裂纹扩展特性研究
9.
EFFECTS OF LOAD PARALLEL TO THE CRACK ON THE FATIGUE CRACK PROPAGATION RATE
平行于裂纹方向的载荷对于疲劳裂纹扩展速率的影响
10.
The st udy shows that the coupled elastic and electric fields inside piezoelectric med ia depend on the speed of the crack propagation, and have singularity at the cr ack tip.
研究表明 :介质内的耦合场与裂纹运动速度有关 ,在裂纹尖端有奇异 ;
11.
Anisotropic Plastic Stress Fields at a Slowly Propagating Crack Tip
缓慢扩展裂纹尖端的各向异性塑性应力场
12.
The Characteristic on Propagation of Fatigue Pre-cracking 304SS during SSRT with EN and SKP
预制裂纹304SS试样慢拉伸过程EN和SKP表征
13.
Dependece of Fracture Surface Morphology on Velocities in Fast Fracture of PMMA;
高速破坏的PMMA断裂表面形态与裂纹速度的相依关系
14.
Grain size had some effect on the rate of crack propagation.
晶粒尺寸大小对裂纹扩展速率也有影响。
15.
Standard test method for fatigue crack growth rates of metallic materials
GB/T6398-1986金属材料疲劳裂纹扩展速率试验方法
16.
The fatigue testing of the heterogeneous plates showed that the mechanical heterogeneity affected the fatigue crack growth rate.
试验表明,力学不均匀性影响疲劳裂纹扩展速率。
17.
Fatigue Crack Growth Rate and Threshold in Tool and Die Steels
工模具钢的疲劳裂纹扩展速率与门坎值
18.
DSIF computation of dynamic crack growth with non uniform velocity by TDBEM
非匀速动态裂纹应力强度因子的边界元算法