1.
It has been introduced the principle and structure of necking machine for the front cross member pipe.
介绍了前横梁管材缩口机的原理及结构。
2.
The deformation characteristics of the cross member pipe have been analyzed with determination of necking numbers and necking force.
分析了前横梁管材缩口的变形特点,确定了缩口次数和缩口力。
3.
Place the sling crossbar under and forward of the bumper.
将车门门槛横梁放在保险杆的前下方。
4.
Influence of Support Means of Hinge-Bearing for Container Crane's Boom on Lateral Vibration
岸桥前大梁铰支座支承对其横向振动的影响
5.
The horizontal beam on a cross or gallows.
横梁十字架或绞架上的水平横梁
6.
Something, such as a part or beam, that is transverse.
横向的横向的物体，如横梁的一部分
7.
Remove bolts holding front of suspension crossmember to frame rails under upper control arms.
卸下将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
8.
Before work is begun at a hatch the beams thereof shall either beremoved or be securely fa stened to prevent their displacement.
在舱口开始工作之前，应移去其横梁，或牢系之，以防移动。
9.
Install bolts holding front of suspension crossmember to frame rails under upper control arm.
安装将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
10.
Research on Key Technology of Welding Robot Workstation of Business Vehicle's Front Axle Beam;
商务车前桥横梁焊接机器人工作站关键技术研究
11.
"The frame consists of two straight pressed-steel members, five cross members, the front axle, the rear axle and four wheels."
车架由两根冲压成形的钢制直梁、五个横梁、前桥、后桥和四个车轮组成
12.
The victims were pinned (down) by a fallen beam.
受害者被倒下的横梁压
13.
a horizontal beam that extends across something.
伸过某物的水平横梁。
14.
Raise crossmember into position.
升起横梁，使其就位。
15.
A toed beam.
一根斜钉钉牢的横梁
16.
Raise vehicle at body rails.
在车体横梁处顶高车辆。
17.
Remove the tow hook from the lower crossmember.
从下横梁拆卸拖曳钩。
18.
Radiator Upper Crossmember Typical
散热器上横梁 典型的