1.
Position clutch cover over disc and on flywheel.
把离合器盖板放在离合器片和飞轮上。
2.
Clutch disc facing contaminated with oil, grease, or clutch flui
离合器片表面沾机油、黄油或离合器液压油。
3.
Install the upper side gear and clutch disc pack.
安装顶部侧齿轮和离合器片组件。
4.
Facing on flywheel side of disc torn, gouged, or worn.
离合器片在飞轮侧的表面撕裂、擦伤或磨损。
5.
A Study of Frictional Behavior of Clutch Disc by Regressive Design
用回归设计法进行离合器片摩擦特性的研究
6.
friction clutch of double-disk dry type
干式双片摩擦离合器
7.
Replace cover and disc.
更换离合器盖与片。
8.
worn clutch facing
磨损的离合器摩擦片
9.
dry-type multidisc electromagnetic clutch
干式多片电磁离合器
10.
wet type multi-disc electromagnetic clutch
湿式多片电磁离合器
11.
Remove clutch cover and disc.
拆下离合器盖和片。
12.
Clutch Type Single sheet, dry type, film spring
离合器型式：单片、干式、膜片弹簧
13.
The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.
转向离合器湿式、片、末冶金摩擦片、簧压紧、压分离。
14.
The Starting Analysis of Multi-disc Wet Clutch for CVT
无级变速器多片湿式离合器起步分析
15.
Ortlinghaus plate clutch
摩擦片式离合器oscillate摆动振动振荡
16.
single-plate, dry, mechanical control (in clutch)
离合器单片干式机械操纵
17.
hydraulically actuated wet multiplate clutch
液压作动湿式多片离合器
18.
LOWER SIDE GEAR AND CLUTCH DISC PACK
下部侧齿轮和 离合器 片组件