1.
Study on Groove Optimization of Complex Three-Dimension Grooves Milling Insert;
三维复杂槽型铣刀片槽型优选技术的研究
2.
Optimized model and template for anode exchange sequence of prebaked anode cell
预焙槽阳极更换顺序表的优选模型和模板
3.
Study on Measuring Technology and Choice of 3D Non-Uniform Groone of Milling Tools;
三维铣刀片复杂槽型测量技术及优选技术的研究
4.
Screening Identification and Optimal Biodegradation Conditions of Denitrification Bacteria in Biological Purification Tank
生物净化槽中脱氮菌种的筛选鉴定与条件优化
5.
Study on Design and Optimization of the Electric-Magnetic Field of Large Prebaked Aluminum Reduction Cells;
大型预焙铝电解槽电磁场设计与优化研究
6.
The Research on Optimize of Large Pre-baked Anode Cell Process Technical Conditions;
大型预焙铝电解槽工艺技术条件优化试验
7.
Study on Ultimate Bearing Capacity and Optimum Design of Prestressed RPC Channel Girders;
预应力RPC槽型梁的极限承载力及优化设计研究
8.
Study on Body Type Optimization of Gate Slot of Jishi Gorge Middle Orifice Discharge Hollow;
积石峡中孔泄洪洞工作门槽体型优化研究
9.
Numerical simulation and optimization of busbar configuration in large aluminum electrolysis cell
大型铝电解槽母线配置的数值仿真与优化
10.
Optimization design of prestressing tendon without bond in U-shape aqueduct bridge
U型渡槽环向无粘结预应力钢绞线束优化设置
11.
Type Selection and Kinematic Behavior Analysis of Conveyer Chutes in Postal Hubs;
邮政枢纽输送滑槽的选型及运动特性分析
12.
Brief Discussion on Selection of Stator and Rotor Slot Shapes of 1.5MW Doubly-Feed Wind Generator
浅谈1.5MW双馈风力发电机定、转子槽型的选择
13.
RESEARCH OF SOLIDS SUSPENSION IN LARGE-SCALE MECHANICAL FLOTATION CELL
大型机械搅拌式浮选机槽内固体悬浮的研究
14.
mechanical floatation cell
【采矿】机械浮选槽
15.
STUDY ON THE POSSIBILITY OF APPLICATION BKY WET MAGNETIC SEPARATOR AND BL1500 SPIRAL CHUTE ON ONE KIND OF IRON ORE
BKY型预选磁选机与BL1500螺旋溜槽应用于某铁矿的可行性研究
16.
Optimization Algorithm CAD Auto Selecting Type of Pumps;
泵的CAD Auto选型优化算法
17.
Type Selection and Design Optimization of FPGA/CPLD
FPGA/CPLD选型与设计优化
18.
Research on the Resonant-Tank Parameters Design and Load-Matching of Voltage-Source Load-Resonant Converters;
电压型负载谐振变换器谐振槽路参数优化设计与负载匹配的研究