说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 高碱度烧结
1.
Research on Composition of Mineral and Microstructural of High Basicity Sinter
高碱度烧结矿矿物组成及显微结构研究
2.
The Relation between the Microstructure of Sinter Ore with High Basicity and Reduction Disintegration
高碱度烧结矿显微结构与低温还原粉化的关系
3.
The Study on Blast Furnace Burden Structure with Different Basicity Sinter Ore
酸性和高碱度烧结矿合理搭配的高炉炉料结构研究
4.
Research and Practice on Improvement of Taisteel Sinter Alkalinity Stability
提高太钢烧结矿碱度稳定性的研究与实践
5.
EXPERIMENT INVESTIGATION ON INFLUENCE OF SUPERHIGH BASICITY ON SINTER PROPERTIES
超高碱度对烧结矿性能影响的试验研究
6.
Influence of Superhigh Basicity on Sinter Properties and Sintering Parameters
超高碱度对烧结矿性能与工艺参数的影响
7.
Problems and Innovation on High Elec trical Current Density
高电流密度离子膜烧碱装置问题及改进
8.
Practice of Improving the Sinter Strength on the 90m~2 Sintering Machine in MaSteel;
马钢90m~2烧结机提高烧结矿强度的实践
9.
Practice About Raising Tumbler Strength of Western Zone Sinter on Ansteel
鞍钢西区烧结提高烧结矿转鼓强度的实践
10.
Study on the factors influencing sinter strength through adding different quicklime under conditions of constant alkalinity
恒定碱度条件下生石灰配比对烧结矿强度的影响研究
11.
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
12.
Study of Prediction Model of R in Sintering Process Based on Multisensor Data Fusion;
基于多传感器数据融合技术的烧结矿碱度预报模型的研究
13.
Application of alkali-slag cementation materials in rapid determination of fired perforated bricks compressive strength
碱矿渣胶凝材料在快速测定烧结多孔砖抗压强度中的应用
14.
Conclusion Upregulation of SPARC mRNA expression by corneal epithelium is specifically associated with corneal chemical burn and injury.
结论  SPARC在角膜碱烧伤和创伤过程中具有高水平表达。
15.
Effects of Grain Size on Sintering Properties of High Iron Trihydrate Bauxite and Sinter Microstructure
粒度对高铁三水铝石型铝土矿烧结性能和烧结矿显微结构的影响
16.
Research on Microstructure and Properties of Iron-based High Density Sintering Materials;
铁基高密度烧结材料组织及性能研究
17.
Practice of Increasing the Bed Depth in 360 m~2 Sinter Machine
提高360m~2烧结机料层厚度生产实践
18.
Microwave sintering of W-Ni-Fe heavy alloys
W-Ni-Fe高密度合金的微波烧结