1.
rising-stem double-disk parallel slide valve
明杆平行式双闸滑阀
2.
Characteristics of Icing in High Pressure Pneumatic Relief Valve with Slide Pilot
滑阀先导式高压气动减压阀结冰特性
3.
Simulation Research on Effect of Edge Geometric Error of Valve Orifices to Spool Valve Characteristic;
阀口棱边几何误差对滑阀性能影响的仿真研究
4.
CFD Study for the Flow Field Inside the Hydraulic Spool Valve Considering of the Movement of Valve Element;
阀芯运动过程液压滑阀内部流场的CFD计算
5.
Clearance leakage in high pressure pneumatic relief valve with slide pilot
滑阀先导式高压气动减压阀间隙泄漏特性研究
6.
Steady-state Fluid Force Direction of Comparative Analysis about Slip Valve and Cone Valve
关于滑阀与锥阀中稳态液动力方向的比较分析
7.
no-flow position
中间位置(调节系统中滑阀的位置)
8.
combination sliding and rotary spool valve
又移动又旋转的圆柱滑阀
9.
Askania auxilliary piston
喷射管滑阀式两级液压放大器
10.
Study on Vibration Mechanism and Optimize Design of Slide-valve Vacuum Pump;
滑阀真空泵振动机理及优化设计研究
11.
Investigation into Flow Coefficient of Orifice and Calculation of Steady Flow Force of Spool Valve with Notches;
节流槽滑阀阀口流量系数及稳态液动力计算的研究
12.
Research on Hydraulic Valve with V-Groove on CFD Numerical Analysis;
基于CFD解析具有V型槽的液压滑阀特性研究
13.
Effect of discretization scheme on numerical analysis of flow through spool valve;
差分精度对液压滑阀内流体数值解析的影响
14.
Numerical Simulation of the Flow Field inside Hydraulic Spool Valve Based on Fluent
基于Fluent的液压滑阀内部流场的数值模拟
15.
The valve should require no lubrication, and contain no "dead" volumes.
注样阀应无需润滑，阀内要无“死”角。
16.
Slide one half of the splash guard into the groove on the relief valve body.
将防溅保护的一半滑动到安全阀阀体的沟槽上。
17.
Kits include: Disc& Spring assembly, Cover O-ring and lubricant.
组件包括：阀瓣和弹簧总成，阀盖O形环和润滑剂。
18.
Lubrication- Where lube fittings are provided, valves should be lubricated periodically.
润滑-在配置润滑油连接件的地方，应该对阀门进行定期润滑。