1.
Card slivers are fed to the breaker-drawing frame where several card slivers are combined.
梳棉棉条喂人头道并条机,在头道并条机上几根梳棉棉条并合在一起。
2.
At the doffer, fibers are removed and eventually enter the card sliver.
纤维被从落纱机上剥下，形成梳棉棉条输出。
3.
The breaker-drawing unit smooths out the card slivers, pulls out the fibers into a thin layer, and re-forms a new sliver.
头道并条机将梳棉棉条的纤维梳理平行顺直并拉伸成薄层,再重新形成棉条。
4.
For yarns that require the additional step, the card sliver goes through the breaker- drawing step and then to the combing operation.
对于需要精梳的纱线,梳棉棉条通过头道并条后,进入精梳工序进行加工。
5.
The card sliver is not completely uniform in diameter, and the fibers are somewhat random in arrangement.
梳棉棉条的直径并不是完全均匀的。其内部纤维的排列相对混乱。
6.
The continuous system for making ring-spun vams takes fibers directly from the bale and processes them automatically through to at least the card sliver state.
在生产环锭纱线时,如果采用连续加工系统,则纤维从棉包开始,要自动加工至少到梳棉棉条阶段。
7.
Influence of wind′s flow of web cleaner in a carding machine on the quality of card sliver
梳棉机棉网清洁器风量对生条质量的影响
8.
Analysis of influence of scutching process flow of chute feed card forchemical fiber on nep creation of the card sliver
浅析化纤清梳联清棉流程对生条棉结的影响
9.
Investigation of the Relationship between Card Waste Intermittent Suction and Card Sliver Quality
梳棉机车肚间歇吸落棉与生条质量的关系
10.
carding [pre-spinning process]
梳棉〔纺纱前工序〕
11.
The effect of carding feed plate and taker-in on card sliver quality
梳棉机给棉板与刺辊隔距对梳棉质量影响
12.
Size of the coiler trumpet not adjusted to the hank.
圈条器喇叭口的尺寸与梳棉条的支数不合适。
13.
Further steps may be connected to the card so that the card sliver moves on through additional processes automatically.
下一步的加工可以与梳棉机联接,这样棉条会自动地进入下一工序。
14.
Slivers from either the carding unit or the combing unit, depending on the ultimate yarn desired, are processed through the finisher- drawing.
从梳棉机或精梳机下来的棉条,根据对纱线的最终要求,进一步在并条机上加工。
15.
yarn dyed combed cotton high count poplin
色织纯棉精梳高支府绸
16.
flat knit combed cotton vest
精梳棉纱平针内衬衣
17.
combed cotton yarn knit anklets
针织梳细棉纱反口短袜
18.
rayon combed cotton cord
人丝梳细棉纱线纹布