1.
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type
GB/T5900.2-1997机床主轴端部与花盘互换性尺寸第2部分:凸轮锁紧型
2.
cam shaft reversing lock
凸轮轴换向闭锁装置
3.
self-locking differential with side ring and radial cam plate
凸轮滑滑块自锁差速器
4.
The article applied this kind of method to force locked cam and grooved cam.
文章将这种方法应用于力锁合凸轮和槽道凸轮。
5.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座
6.
Counter Design of Needle-bar Compound Cam in an Eyelet Buttonholer
圆头锁眼机针杆复合凸轮的反求设计
7.
Slide and tap in reservoir retainer clips until tab locks to housing.
滑动并敲击贮油槽扣件夹，直至凸耳锁紧外壳。
8.
Electromagnetic locking device based on self-locking for magnetic suspended flywheel
基于自锁原理的磁悬浮飞轮电磁锁紧机构
9.
Motor+ reducer+ cam+ shrinking arm action. Large package force, low malfunction and convenient maintenance.
电机+减速机+凸轮+紧缩臂动作，捆紧力大，故障少，维修方便。
10.
(used of toothed parts or gears) interlocked and interacting.
（用来指有齿的零件或者齿轮）相互锁紧、相互作用。
11.
Roller and Pushing-rod Locking Device for Cable Breaking and the Design of its Virtual Prototype
滚轮顶杆式断缆锁紧装置及其虚拟样机设计
12.
overhead cam shaft
上凸轮轴上部凸轮轴
13.
In other words, the regular side of the cam shaft and the fuel running of the main engine are interlocked with each other.
换句话说，凸轮轴的调油侧与主机的燃油运转是相互联锁的。
14.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
15.
After handle is reinstalled, just tighten up the nuts and washers with force. After gear box is reinstalled, just tighten up the screws and washers with even force.
重新安装把手将螺母及华司用力锁紧即可。重新安装齿轮箱将跟螺丝及华司用力平均锁紧即可。
16.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
17.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
18.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床