1.
Do the Temperature Set Points& Conveyor Speed written on the Thermal Profile correspond to the current Program settings?
温度曲线图上的温度设定点与炼速是否与当前的程序设定相同??
2.
Were the Temperature Set Points and Conveyor Speed logged for that Thermal Profile when it was conducted?
当作温度曲线图时,温度设定点与炼速是否记录于此图?
3.
Setting of Object Surface Temperature of Casting Slab Based on Support Vector Regression
基于支持向量机回归的铸坯表面目标温度设定
4.
Clinical study of wetting enginery's temperature setting in invasive ventilation
有创通气中湿化器温度设定的临床研究
5.
maximum assessed fuel element temperature
燃料元件最高设定温度
6.
calibration equipment of reversing thermometer
颠倒温度表检定设备
7.
Design of Fuzzy Self-turning PID Control Greenhouse Temperature Controller
模糊自整定PID温室温度控制器的设计
8.
Multi-channel Temperature Control System Design of the Multifunctional Low-temperature Measuring Instrument
多功能低温测定器的多路温度控制系统设计
9.
Establish proper injector and detector temprature.
给进样口和检测器设定恰当的温度。
10.
The reflow process relies on the temperature profile setting.
回流过程依赖于温度曲线的设定。
11.
The Design and Manufacture of High-Stabilization Temperature Control Module;
高稳定度恒温控制模块的设计与制作
12.
The Design of Temperature Control Scheme for ABD-100 ACF Bonding Machine
ABD-100 ACF邦定机温度控制方案的设计
13.
Design of controllable temperature electric iron based on 555 timer
基于555定时器的可控温度电烙铁设计
14.
Powerful magnetized scald-proof device( Patent No.:2005200002949.1)--- can proof the instant scald caused by outflow water.
数码温度显示---精确显示水温设定，防止水温过高造成烫伤。
15.
Furnace and Thermal Processes- Equipment with a temperature gauge used for processing wafers. A constant temperature is required for the process.
炉管和热处理-温度测量的工艺设备，具有恒定的处理温度。
16.
Set the number of degrees that any heated component can exceed its assigned set-point temperature before an over temperature fault occurs.
严格限定所有受热零部件温度高于所设定最高运行温度的度数，以防设备过热而出现故障。
17.
Typically the rear zone/ zones are set10-20 degrees F(6-12 degrees C) cooler than the front zone and nozzle.
通常后段及后面各区段的设定温度比前段喷嘴的设定温度低10-20℉6-12℃。
18.
Modeling and Optimization for the Temperature of Converter Inlet on Metallurgical Acid Plant
烟气制酸转化器入口温度建模与优化设定