1.
semi-auto matic cutting the double groves
![点击朗读](/dictall/images/read.gif)
半自动气割双面坡口
2.
coil spring loaded slotted oil control ring
![点击朗读](/dictall/images/read.gif)
螺旋弹簧加载双坡口油环
3.
The Stability Analysis of the In-Outflow Slope of Shuangjiangkou Hydroelectric Power Station;
双江口水电站进出水口边坡稳定性分析
4.
Application of four-slope and double-gutter roof in stories adding works
![点击朗读](/dictall/images/read.gif)
四坡双天沟屋面在加层建筑中的应用
5.
Safety monitoring on high slope of on-site road of Shuangjiangkou Hydropower Project
![点击朗读](/dictall/images/read.gif)
双江口水电站工程场内道路高边坡安全监测
6.
Research on calculation method of double-row anti-sliding structure under sliding surface
![点击朗读](/dictall/images/read.gif)
滑坡面下双排抗滑结构的计算方法研究
7.
The Calculation about Intensity of Form Slops Based on Two-Dimension Measure
![点击朗读](/dictall/images/read.gif)
基于双维量化法的坡面径流强度指数计算
8.
It is then ready for the operator to initiate faceplate rotation and machine the bevel.
![点击朗读](/dictall/images/read.gif)
此时操作者可启动旋转面板并切削坡口。
9.
One side welding thermal cycle measuring experiment of heavy plate with V-shape groove
![点击朗读](/dictall/images/read.gif)
特厚钢板V型坡口单面焊接热循环测定实验
10.
Numerical Simulation of Effects on Wind Loads on the Roof of Low-rise Gable-roofed Buildings;
低层双坡屋面房屋屋面风荷载影响因素的数值模拟
11.
The Design and Improvement of Two-Face Pressed Sliding Gate s Mold;
![点击朗读](/dictall/images/read.gif)
双面加压滑动水口模具的设计与改进
12.
Taguchi Method and Dural Response Surface Methodology;
![点击朗读](/dictall/images/read.gif)
田口方法和双重曲面响应(DRSM)法
13.
Computer controlled polishing for middle or small double-sided aspheric lens
![点击朗读](/dictall/images/read.gif)
中小口径双非球面数控抛光技术研究
14.
Numerical simulation of effects of roof factors on mean wind pressure on gable-roofed low-rise buildings with eaves
低层双坡房屋屋面平均风压影响因素的数值模拟研究
15.
Research on Virtual Slope Walking Gait Generation Algorithm for Planar Biped Robot
![点击朗读](/dictall/images/read.gif)
平面双足机器人虚拟斜坡行走步态生成算法研究
16.
At the lower end of each roof slope, eaves purlins are provided over the ceiling joists.
![点击朗读](/dictall/images/read.gif)
屋面两坡的下方,檐口的连系梁支承在平顶搁栅之上。
17.
Tool Path Modeling and Solving for NC Laser Cutting 3D Surface with Grooves
![点击朗读](/dictall/images/read.gif)
带坡口的3D曲面数控激光切割轨迹建模及其运动求解
18.
the side of the mountain, tower, haystack
![点击朗读](/dictall/images/read.gif)
山、 塔、 草堆的坡面