说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 柱直径
1.
High-Precision On-Line Measuring System for Cylinder Diameter with Large Range
高精度圆柱直径大量程在线测量系统
2.
graduated tubing
直径分段减小的油管柱
3.
The diameter of the inside of a round cylinder, such as a tube.
口径圆柱体内侧圆的直径,如管道
4.
The diameter of the column has now decreased to 2, 000 feet.
这时水柱的直径已减少到2000英尺。
5.
The rolling element (steel ball or pin roller) diameter(mm)
滚动体(钢球或滚柱)直径(mm)
6.
The Computation Analysis and Program Realization for Wave Force on Small-diameter Vertical Cylinders;
小直径桩柱波浪荷载的计算分析及程序实现
7.
Research on Diameter Measurement Technique of Thin Cylinder by Laser Diffraction;
激光衍射法细圆柱体直径测量技术研究
8.
Construction Technology of Repaint Scaffold in Large-diameter Steel Pipe Column
大直径钢管柱高空补漆脚手架施工技术
9.
The construction technology of rigid combined large-diameter-steel-tube-concrete column
大直径钢管——混凝土劲性组合柱施工技术
10.
Large-diameter cylinder seal structure analysis and improvement
基于大直径柱塞缸密封结构的分析与改进
11.
The eupatheostat consisted of a vertical cylinder 550 mm high by 190 mm diameter.
拟人器是由一个直径为190mm,高度为550mm的垂直圆柱体构成。
12.
A large, cylindrical container, usually made of staves bound together with hoops, with a flat top and bottom of equal diameter.
桶圆柱形大容器,常由桶板及周围的铁箍组成,平顶平底且直径等同
13.
Research on the Dynamic Response of the Large-cylinder Shell Structure and Numerical Simulation of the Stochastic Wave Forces;
大直径圆柱壳结构动力响应及随机波浪力数值模拟研究
14.
Research on the Stability of a Large-diameter Ground-supported Flat-bottomed Cylindrical Steel Silo Load of Alumina Powder
大直径落地式平底氧化铝圆柱钢筒仓稳定性能研究
15.
The Summarization on Measuring of Large Diameter Based on Chord Length and Bow Altitude
基于弓高弦长的大型圆柱工件直径检测方法的研究
16.
Research on Welding Technics and Performance Analysis of Large Diameter Stud with Compound Heat Source
大直径螺柱复合热源工艺试验研究及性能分析研究
17.
Three-Dimensional Numerical Simulations of the Viscous Flow Past a Large Diameter Cylinder of the Spar Platform under Supercritical Reynolds Number
超临界雷诺数下Spar平台大直径柱体绕流的三维数值模拟
18.
Mathematical Optimization Model for Embedded Large-Diameter Cylindrical Shell Structure under Lateral Loads
横向荷载作用下插入式大直径圆柱壳结构的优化数学模型