1.
pressure contact thyristor
压力接点可控硅整流器
2.
electric point pressure type thermometer
电接点压力式温度计
3.
A Method of the Printing Press & Contact Area Rate in Half-Toning Dot Printing on Fabrics
织物网点印花压力与接触面积比的关系研究
4.
Finite Element Simulation and Analysis of Contact and Utimate Bearing Capacity on Cable Anchor Joints;
索端冷压锚固节点接触及承载力模拟分析
5.
The Reason for the Multi-point Grounding Fault of Power Transformer's Iron-core and Analysis
电力变压器铁心多点接地故障原因及分析
6.
The Design and Development of Point Contact-Dynamic Compression Plate (PC-DCP);
新型点式接触动力加压接骨板的研制与实验研究
7.
Power system neutral1 grounding is usually done by means of transformer and generator neutrals.
电力系统中性点通常通过变压器和发电机的中性点来接地的。
8.
neutral autotransformer
中性点接地自耦变压器
9.
rocking contact voltage regulator
摇动接点式电压调整器
10.
voltage regulator contact bracket
电压调整器接角点托架
11.
The pressure at point a is twice greater than that at point b.
A点的压力比B点的压力大两倍。
12.
An actual contact surface burst leads to the highest possible overpressures near ground zero.
对于实际接触表面爆炸情况，在地面零点附近可形成最大的超压力。
13.
Mechanical Behavior Research for High Strength Bolt Connection Joint of Main and Secondary Beam
主次梁承压型高强度螺栓连接节点受力性能研究
14.
Experimental study and design of compressive behavior of gusset plates connected with single angle members
单角钢连接节点板受压性能试验研究与承载力计算方法
15.
Compressive behavior and ultimate strength of gusset plate contacted with single angle
单角钢螺栓连接节点板受压性能及极限承载力研究
16.
Evaluation of Vncertainty about Indication Error of Electric Contact Filled System Thermoneter in Result of Measurement
压力式电接点温度计示值误差测量结果的不确定度评定
17.
Investigation on the Limit and Burst Pressures for the Vessels with Nozzle;
带接管压力容器极限压力及爆破压力的研究
18.
curve tube pressure balance expansion joint
曲管压力平衡伸缩接头