1.
Measured by an angle or by degrees of an arc.
用角测量的,用弧度测量的
2.
measured by an angle or by the rate of change of an angle.
用角测量的或用弧度测量的。
3.
Evaluation Method of Measurement Uncertainty for Tensile Strength of Arc Tube Tensile Sample
管材弧形试样抗拉强度测量不确定度评定方法
4.
Selection of Spectroscopic Buffers in Spectrochemical Analysis of Rare Earth (Ⅱ) Measurement of Arc Temperature
稀土元素发射光谱分析中光谱缓冲剂的选择(Ⅱ) 电弧温度的测量
5.
Study on Measurement Method of Off Tuning Degree in the Distribution Network of Neutral Resonant Grounding;
中性点经消弧线圈接地的电力网脱谐度测量方法的研究
6.
Study on the Derect Tensile Strength of Mortar with Arc-I Shaped Test Piece
采用圆弧I型截面试件测量砂浆直接抗拉强度的研究
7.
Flow Velocity Measurement in a Non-Transferred DC Arc Plasma-Jet by Using Electrostatic Probes
减压直流非转移弧等离子体射流速度的静电探针测量
8.
The edge of a graduated arc or circle used in an instrument to measure angles.
（四分仪等的）分度弧或圆圈，用于量角度
9.
Survey computing and controlling of plane column net in arc structure
弧形结构平面柱网的测量计算与控制
10.
The Measurement of Disturbance Voltage and Radiated Emission for Arc Welding Equipment
弧焊设备骚扰电压和辐射发射的测量
11.
Measurement and Error Analysis of Overhead Line Arc Sag with Large Pole Span
大档距架空线弧垂测量及其误差分析
12.
Analysis on Sag Measurement and its Error of 750 kV Transmission Line
750 kV凉乾线路弧垂测量及其误差分析
13.
Improvement Method of Measuring and Tuning of Automatic Arc-suppression Coil
自动消弧线圈的测量及调谐改进方法
14.
The measure of plane of a simple arc in a unit square;
单位正方形内一个简单弧的平面测度
15.
Determination of Heat Flow Density in Fillet Radius Area of Billet Mold
方坯结晶器角部弧形区热流密度测定
16.
It measures790 meters along its curve and drops49.4 meters.
按弧度可测出其宽度达790米，落差为49.4米。
17.
Analysis on the inspection of comus,degree of near-sightedness and the length of optical axis
近视弧形斑、近视度、视轴长度的检测分析
18.
(in surveying)angle between this arc and the meridian
（测量中）方位角（此弧与子午圈之间的夹角）.