1.
Design Approach on Quick-carry Circuit of Synchrocounter;
同步计数器快速进位电路的设计方法
2.
complement and carry add circuit
补码及进位加法电路
3.
Discussion on the Potential Working for the 500 kV Compact Transmission Line
500kV紧凑型输电线路进入等电位方式探讨
4.
Design of Low-power Decimal Counter with Reset Based on CTGAL Circuit
基于CTGAL电路的低功耗十进制复位计数器设计
5.
To conduct engineering by putting any part of lifting machinery into the overhead power line protection zones.
（二）重机械的任何部位进入架空电力线路保护区进行施工。
6.
Trigger circuit, power supply circuit, clocking circuit and reset circuit are the main circuits on the main board.
触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
7.
symmetrical heterostatic circuit
对称异电位差连接电路
8.
black level clamping circuit "
黑色"电平箝位电路
9.
plitude-controlled clamp
电压振幅箝位控制电路
10.
Simultaneously it gives the circuit design of the lower position machine. The lower position machine realizes the real-time monitor to the movement parameter of the accumulator cell.
同时给出了下位机的电路设计,下位机实现对蓄电池的运行参数进行实时监测。
11.
The Study of Fault Location Algorithm Using Transient Fault Signal for EHV Transmission Lines
利用输电线路故障暂态信号进行故障定位的算法研究
12.
The Analysis of Factors of the Engineering Unit Price of the Power Line Construction;
改进输电线路工程单位造价指标,提高工程造价评估水平
13.
Analysis and Design of Ball-screw Feeding Test-bed and Self-Return Circuit
滚珠丝杠进给系统试验台与自动回程限位电路的设计与分析
14.
azimuth rate circuit
方位角速率测量电路
15.
transistor base clamper circuit
晶体管基极箝位器电路
16.
autonomous shift register circuit
自激移位寄存器电路
17.
shift register storage circuit
移位寄存器式存储电路
18.
phase lead-lag network
相位超前-滞后电路