1.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
2.
Remove caliper mounting bolts .
拆卸夹制器固定螺栓。
3.
Reinstall handwheel and secure with retaining bolt.
重新安装手轮，用固定螺栓加固。
4.
Generator Mounting Bolt—LHD—5L/Engine
发电机固定螺栓—LHD—5L/0L引擎
5.
Fuel Rail Mounting Bolts—Engines
燃油轨道固定螺栓—2升/9升引擎
6.
Throttle Body Mounting Bolts—Engines—Typical
节气阀体固定螺栓—引擎—典型的
7.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
8.
Position lever assembly on floorpan and install lever mounting bolts.
将拉杆组合放置到底板上并安装拉杆固定螺栓。
9.
Rear Mount To Body Bolts
后固定座与车身螺栓
10.
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓
11.
These nuts and bolts hold the wheels on.
这些螺帽和螺栓把轮子固定住了.
12.
Remove hinge retaining nuts from studs.
从双头螺栓拆下固定铰链的螺帽。
13.
These bolts and nuts hold the wheels on.
这些螺栓和螺帽把轮子固定下为。
14.
Fillet welded;Screwed and plugged;Quick release;Flanged and bolted;Flanged and bolted 2
角焊;旋拧插塞式;速释;带法兰以螺栓固定;带法兰以螺栓固定 2
15.
Remove bolts that attach hinges to hoo
拆下把铰链固定在引擎罩上的螺栓。
16.
Remove bolts holding shift lever to transmission.
拆卸将排挡杆固定到变速箱的螺栓。
17.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
18.
Mounting and Control on Full Diameter Bolt in 1780 Project in AISC
鞍钢1780工程大直径螺栓固定与控制