1.
contractor's tria
承造厂试航承造厂试验
2.
INDUSTRIAL AGGLOMERATING TEST TO ADD TITANIUM CONCENTRATE FROM NEW ZEALAND
承钢烧结厂配加新西兰钛精矿烧结工业试验
3.
Study on HCR Process Modification Test of Wasterwater Treatment Plant in Xiao Shan District;
萧山区污水处理厂HCR工艺改造试验研究
4.
Experimental Study and Modification Practice for the Printing and Dyeing Wastewater Treatment of Bannner and Tent Factory;
旗篷厂印染废水处理试验研究和工程改造实践
5.
A Pilot-experimental Study on the Application of Pelleting Fluidized Bed Concentration Technology to Water Plant Wastewater Treatment;
水厂排泥水造粒流化床浓缩中试实验研究
6.
Study on Retrofit to Flow Passage of Domestic 300MW Steam Turbine and the Thermal Performance Test;
国产300MW汽轮机通流改造及电厂试验研究
7.
Technical Retrofit and Experimental Investigation on the Ash Handling System of HARV 300MW Unit;
衡水电厂300MW机组除灰系统技术改造与试验研究
8.
Experimental Research on Application of Activate Carbon Technology in Waterworks Reconstruction;
活性炭技术在水厂改造中应用的试验研究
9.
Heat treatment of G20CrNi2MoA steel for bearing roller in stead of G20Cr2Ni4A steel
G20CrNi2MoA钢代替G20Cr2Ni4A钢制造轴承滚子的热处理试验
10.
The laboratory test of pelleting and roasting with proportioning of inplant pellet dust was presented.
着重介绍了采用球团厂除尘灰造球焙烧实验室试验。
11.
Hydraulic Turbine Model Acceptance Test of No.2 Unit of Xinanjiang Hydropower Station
新安江水电厂2#机增容改造水轮机模型验收试验
12.
Abstract: The laboratory test of pelleting and roasting with proportioning of inplant pellet dust was presented.
文摘:着重介绍了采用球团厂除尘灰造球焙烧实验室试验。
13.
Maker make trial product exactly conform specification expect completion within fortnight
厂家已在试验制造，完全符合所要求的规格，可望在两周内完成。
14.
TESTING STUDY AND COMPREHESIVE WAY TO CONTROL SLAGGING IN THE FURNACE AND OVERTEMPERATURE OF THE SUPERHEATER FOR BOILER No.8 IN BAOTOU THERMAL POWER PLANT No.1
包头第一热电厂8号炉炉膛结焦、过热器超温的试验研究及改造
15.
Reformation and Operation Optimization for 440T/H CFB Boiler of Liangzhou Power Plant
连州电厂440t/h CFB锅炉综合改造及运行优化试验研究
16.
Experimental study on the application of short process in the wastewater treatment plant upgrading reconstruction
短流程工艺用于污水处理厂升级改造的试验研究
17.
waste isolation pilot plant
废物隔离中间试验工厂
18.
d inspection plan
工厂试验与检查计划