1.
Reverse Design and Simulation Process of Oil Pump Box Based on Mastercam
基于Mastercam的油泵箱体的反求设计与仿真加工
2.
"A fuel pump delivers fuel from the tank to the carburetor. There are two general types of fuel pump, mechanical and electric. "
油泵把油箱中的燃油抽出送到化油器中。通用的油泵有两种:机械泵和电子泵。
3.
The key to the technological transformation is the design of the manual oil pump、 the delivery pump and the whole transmission box.
技术改造的关键是手油泵、油泵及传动箱总成的设计。
4.
"The case of recoiler is used as an oil tank, on which the lubrication oil pump is mounted for circulating lubrication. "
卷取机箱体作为油箱,设有润滑油泵,进行循环润滑
5.
Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc.
产品主要结构：油箱、油管、安装支架、油泵总成及涂油轮等组成。
6.
In the meantime, the gasoline pump has started pumping gas from the tank up through a tube into the carburetor.
与此同时，油泵开始从油箱抽出汽油，通过管道送人化油器。
7.
hand-powered oilcan (incl. those with pump or screw mechanism), of base metal
油箱,手动的（包括带有泵或螺旋机构的）,贱金属制
8.
You will need to pump hard for several minutes to fill the tank.
你需用泵着实抽吸几分钟, 才能把油箱灌满.
9.
You will need to pump hard for several minute to fill the tank.
你需用泵著实抽吸几分钟, 才能把油箱灌满。
10.
Analysis about Breakdown of Screw-type Spindle Pump and Improvement for Warship Gearbox
船用齿轮箱轴带滑油泵的故障分析与改进措施
11.
The vacuum-relief valve opens to allow enough air to enter the tank to replace the gasoline pumped from the tank by the fuel pump.
真空阀通向大气，使足够的空气进入油箱，以补充由输油泵从油箱中吸出的燃油所占的面积。
12.
fuel oil priming pump
起动充油泵、起动燃油泵
13.
fuel-oil transfer pump
燃油输送泵，输油泵
14.
Thoroughly wash and clean area around pump module to prevent contaminants from entering tank.
彻底清洗并清洁泵模组的周围区域以防止杂质进入油箱。
15.
control and primary scavenging pump
控制泵和主动回油泵
16.
They are F. O. pumps， L. O. pumps, ballast pumps, fresh water pumps, sea water pumps, and bilge pumps.
它们是燃油泵，润滑油泵，压载水泵，淡水泵，海水泵，和舭部液舱泵等。
17.
Calibration fluid for diesel injection pump
GB/T8029-1987柴油机喷油泵校泵油
18.
booster pump control panel
加压水泵开关控制箱