1.
Research on Testing Elastic-Plasitc Fatigue-Thermal Deformation Around the Hole
孔周高温弹塑性疲劳变形的检测研究
2.
Fatigue and Creep Behavior of Wood-Plastic Composite Decking Board
塑木地板的弯曲疲劳/蠕变性能研究
3.
Topics include: elasticity, viscoelasticity, plasticity, creep, fracture, and fatigue.
主题包含：弹性、黏弹性、塑性、潜变、破断及疲劳。
4.
Plastic Deform Effect on High Cycle Fatigue Behavior of AZ31 Magnesium Alloy
塑性变形对AZ31镁合金高周疲劳性能影响的研究
5.
THE CHARACTERIZATION OF PLASTICITY INDUCED FATIGUE CRACK CLOSURE BASED ON NUMERICAL ANALYSIS
疲劳裂纹塑性闭合特性的数值分析方法
6.
FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL
相变塑性钢的低周疲劳性能和裂纹扩展速率
7.
Study on Plastic and Fatigue Behavior of Reactor Materials and Sealing Element;
反应堆材料与密封元件的塑性与疲劳行为研究
8.
EVALUATION METHOD OF FATIGUE DAMAGE UNDER VARIABLE AMPLITUDE STRESS BASED ON PLASTIC STRAIN
基于塑性应变的变幅应力疲劳损伤评估方法
9.
Influence of fatigue crack tip plastic zone on crack propagation behavior in TC4ELI alloy
TC4ELI合金疲劳裂纹尖端塑性区对裂纹扩展的影响
10.
Effect of Environmental Factors on Fatigue and Creep Behaviors of Wood-Plastic Flooring
环境因子对木塑地板疲劳/蠕变性能的影响
11.
APPLICATION OF CRYSTAL PLASTICITY THEORY FOR MODELLING LOW CYCLIC FATIGUE OF SINGLE CRYSTAL COPPER
晶体塑性模型在单晶铜低周疲劳行为中的应用
12.
general rules for testing fatigue of rigid plastics
硬质塑料疲劳试验方法
13.
The different kinds of material deformation (elasticity, plasticity, fracture, creep, fatigue) are explained in detail.
不同种材料的变形（弹性，塑性，断裂，蠕变，疲劳），详细解释了。
14.
Numerical Study on Plastic Zone Size Ahead of the Crack Tip and Fatigue Performance of Submarine Model;
裂纹尖端塑性区及潜艇模型疲劳性能数值模拟研究
15.
STUDY ON FATIGUE PROPERTY OF NOTCHED ELECTROPLATED COPPER THIN FILM BASED ON FEM
基于弹塑性有限元分析的电镀铜薄膜缺口疲劳断裂特性研究
16.
The bulk deformation, fatigue and plough were the major wearing mechanism.
结果表明:合金的主要磨损机制是体积塑性变形、沟效应和疲劳磨损。
17.
Test method for tension--tension fatigue of fiber reinforced plastic laminates
GB/T16779-1997纤维增强塑料层合板拉-拉疲劳性能试验方法
18.
STUDY OF CREEP-FATIGUE INTERACTION USING A VISCOPLASTIC MODEL COUPLED WITH A CREEP DAMAGE
耦合蠕变损伤的粘塑性模型用于疲劳-蠕变交互作用的研究