1.
do-engaged constant mesh gears
齿轮离合器接合(的)常啮合齿轮
2.
clutchless speed change gear
无离合器的变速齿轮
3.
clutch center guide
离合器中心齿轮导套
4.
Install the upper side gear and clutch disc pack.
安装顶部侧齿轮和离合器片组件。
5.
starter pinion and clutch yoke
起动机小齿轮及离合器轭
6.
LOWER SIDE GEAR AND CLUTCH DISC PACK
下部侧齿轮和 离合器 片组件
7.
The contours of the sprocket teeth are medium frequency induction hardened. All transmission clutches are of involute spline type.
链轮齿廓经中频淬火。所有换挡离合器均为渐开线花键齿式离合器。
8.
Designment of Gear-Clutch Automatic Transmission for Electric Automobile;
电动汽车用齿轮离合式自动变速器设计
9.
The engine and motor are coupled to the wheels through clutches, and automatic gearbox, and Hy-Vo Chains.
发动机和电动机经离合器自动变速齿轮箱和Hy-Vo链与车轮连接。
10.
A toothed bar that meshes with a gearwheel, a pinion, or another toothed machine part.
齿条与齿轮、锥齿轮或其它带齿的机器部件咬合的带齿的棒条
11.
"The differential case supports the differentail-pinion gear on a shaft, and this gear meshes with the two bevel gears."
差速器壳支承在行星齿轮轴上,行星齿轮与两个半轴齿轮相啮合。
12.
, Ltd was established in1988 and located in Wujin High-Advanced Technology Development Area in Changzhou.
主要生产四大类产品：滚针轴承、向离合器、球面轴承、动齿轮。
13.
Replace gears and examine the remaining parts for possible damagAvoid erratic clutch operation.
更换齿轮并检查其余部件是否损坏。避免不适当的离合器操作。
14.
Unless it has an automatic transmission, every car has a clutch which takes the pressure off the gears so they can shift.
没有自动变速装置的汽车都有离合器，以减轻齿轮的压力，便于换挡。
15.
slip-jaw clutch
波纹齿滑动式离合器
16.
spur geared wheel reductor
外啮合圆柱齿轮式轮边减速器
17.
One cog-wheel engages with another.
一齿轮与另一齿轮啮合.
18.
having gears not engaged or disconnected.
齿轮没有啮合或者分离开。