说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 钳工台
1.
parallel swivel bench vice
平行轮轴钳工台虎钳
2.
The vise (parallel-jaw vice) is available to all of the bench work.
所有的钳工工作都可使用台钳(平口钳)。
3.
The scored jaws of a vise help it bite the work.
台钳上有刻痕的虎钳牙帮助它紧咬住工件。
4.
The vice is bolted to the work-bench.
老虎钳是用螺栓拧在工作台上的.
5.
The surface of the table is cut with T slots so that workholding devices such as the vise can be clamped to them.
工作台的表面切有T形槽以便工件夹具,如台钳,能固定在T形槽上。
6.
And the little tailor took the bear over to the workbench and fixed its paws firmly in the vise.
小裁缝把熊带到工作台,把它的爪子牢牢固定在虎头钳上。
7.
It is forbidden to hold the work-piece by hand to drill holes. The work-piece must be fixed tightly in jaw vice or fixed it on the worktable with press plate.
禁止用手握住工件进行钻孔,应该把工件紧固在虎钳中或用压板固定在工作台上。
8.
special equipment for making pipe twist
管子钳专用加工设备
9.
cramp ,joiners', of base metal
细木工用夹钳,贱金属制
10.
The opening between the jaws of a vise or other holding or gripping tool.
钳口钳子或其它起固定或夹紧作用工具的钳口之间的空间
11.
After grasping the abutment with the forceps, apply a tapping force on the handle of the forceps away from and in the long axis of the implant.
就是钳住了支台之后扣打钳子柄顺著植体直长线将支台扣离植体。
12.
The work-piece must be clamped tightly in jaw vice. Be careful and do not hurt fingers when fixing small work-pieces.
工件必须牢固地装夹在虎钳上,装夹小工件时须防止钳口夹伤手指。
13.
clamp, toolmakers', of base metal
夹钳,工具修理工用,贱金属制
14.
The reform of fitter production practice in technician training school;
技工学校钳工生产实习教学改革探讨
15.
A tool, such as pliers or pincers, used for squeezing or nipping.Often used in the plural.
钳子,镊子一种用来挤紧或夹住的工具,如钳子或镊子,常用于复数
16.
A tool or fastener having strong, adjustable, often toothed jaws.
鳄口钳一种工具或夹子,有坚固可调的,通常为齿状的钳口
17.
DESIGN AND CALCULATION OF THE CLIP OF THE POWER MOTOR TEST STAND USED IN THE WELL
井底动力马达试验台架夹紧钳的设计和计算
18.
Design and calculation of the clip of the screw rod motor test stand used in the well
井底螺杆马达试验台架夹紧钳的设计和计算