1.
Can the tyres be changed smoothly or is a wheel nut jammed somewhere?
能否顺利更换轮胎或者车轮螺母是否卡在哪里了？
2.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
3.
inserted nut abrasive discs and inseted nut ring wheels
带螺母砂盘和带螺母环形砂轮
4.
steering gear adjusting nut lock
转向齿轮调整螺母保险
5.
THE FINITE-ELEMENT ANALYSIS OF FORCE ON THE PUNCH DURING EXTRUSION UPSETTING PROCESS OF AUTOMOTIVE TYRE NUT
汽车轮胎螺母挤镦复合成形过程中冲头受力的有限元分析
6.
Remove screws at wheel opening.
拆卸车轮孔处的螺丝。
7.
Beneath the handwheel is a hexheaded externally-threaded diaphragm-retaining nut.
手轮下面是一个六角形外螺纹横膈膜止动螺母。
8.
The enterprise of younturn hardwares corp. offers you Cap nuts, Nuts and Dowels as well as the further Cap nuts and nuts.
是一家闷盖螺母范围内，以及外加螺母、紧螺母、桃、滑轮和销钉范围内可靠的工业型企业。
9.
A Easy way of turning non Standard Screw Pitch;
车削非标准螺距螺纹的挂轮简便选配法
10.
Tighten wheel nuts until all are properly torqued, to eliminate brake distortion.
拧紧车轮螺帽直到所有螺帽都达到适当的扭力，以免刹车变形。
11.
She and her mother got on the gig to go shopping.
她和母亲坐着轻便双轮马车去购物。
12.
Tightening down on special tool will push wheel stud out of the hub and bearing assembly flangRemove lug nut from stud and remove wheel stud from flange.
上紧特殊工具，即可将车轮螺桩推出轮毂及轴承组件。自螺桩取下凸缘螺帽并自凸缘取出车轮螺桩。
13.
Use the procedure and special tools shown in the service procedures section for the wheel mounting studs when replacing the wheel attaching studs.
更换车轮固定螺桩时，依照维修程序所述车轮固定螺桩的程序并使用特殊工具。
14.
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。
15.
For example, high strength reinforced bar, stainless steel medium plate, auto wheel rim steel and so on.
高拉力螺纹钢筋，不锈钢中板，汽车轮网钢等。
16.
Study on Coupling Non-linear Vibration of Automobile Helical Bevel Gear Transmissions System;
汽车螺旋锥齿轮传动耦合非线性振动研究
17.
Control of Heat Treatment Distortion of Auto Rear Axle Spiral Bevel Gear
汽车后桥螺旋伞齿轮热处理畸变的控制
18.
The research of nut adjustment on micro-car clutch fork
微型汽车离合器分离拨叉螺母调整的研究