1.
Design and Operation of EMP-Segments
弹性金属塑料推力轴承瓦的设计与运行
2.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
3.
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
4.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
5.
full journal bearing
全围式轴承（轴瓦在3600范围内包围着轴颈的滑动轴承）
6.
Pilot bearing in crankshaft. The pilot bearing in the crankshaft is usually either a Bushing or a Ball bearing.
曲轴上的导向轴承:曲轴上的导向轴承一般或者是轴瓦,或者是球轴承。
7.
For this big-end bearing, steel-backed lead or tin shell bearings are used.
对连杆大头轴承来说，使用的是铅的钢背或锡的轴瓦式轴承。
8.
renew worn tyres, bearings, brake-blocks, etc
更换磨损的轮胎、 轴承、 闸瓦等
9.
The machining and assembling methods for bearing with tilted pad was presented.
介绍了可倾瓦轴承的加工及装配方法。
10.
Dynamic Coefficients of Tilting Pad Guide Bea-rings of Hydraulic Turbine Sets, Power Engineering
水电机组可倾瓦导轴承动力特性系数
11.
Common Fault and Treatment of the Tilting-pad Bearing of Power Plant Steam Turbine
汽轮机可倾瓦轴承的常见故障与处理
12.
" Plain bearings-Thin-walled bearing shells-Dimensions, structure elements and tolerances"
GB/T3162-1991滑动轴承薄壁轴瓦尺寸、结构要素与公差
13.
Welds repair of the bush of water flowing diversion bearing of the hydro-generator unit
水轮发电机组水导轴承轴瓦的焊接修复
14.
The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。
15.
This paper analyzes the reasons for the burning of the front radial bearing of the generator turbine Y1701, presents the solutions for modification and the final effects.
针对Y?701发电汽轮机前径向轴承烧瓦故障，分析前径向轴承烧瓦原因，介绍改进措施及效果。
16.
By comparing on the manufacturing technology of the sliding bearing in different works, a new manufacturing technology is given so as to improve on the gluey condition of babbit of the sliding bearing.
比较不同工厂滑动轴瓦的制造工艺，提出新的工艺，从而改善滑动轴瓦锡基轴承合金的粘合情况。
17.
By checking the large hanging type asynchronous motor for the gluey condition of babbit of the sliding bearing, a quality problem of the bearing is found.
通过检查大型悬挂式异步电动机滑动轴瓦锡基轴承合金粘合情况，找出轴瓦存在的质量问题。
18.
Structure Optimization for Hydrostatic Supporting Bush of Crank Shaft and Rod Type Hydraulic Motor
曲轴连杆式液压马达静压支承连杆瓦结构优化