1.
Simulation Study of Microstructure Transition of Liquid Metals Ga during the Different Initial Conditions;
初始条件对Ga冷凝过程影响的模拟研究
2.
Condensation Process in Short-Path Distiller and Test of Erucic-Acid Recovery from Distillation Residues;
刮膜式短程蒸馏器芥酸回收试验及冷凝过程研究
3.
The process by which a gas or vapor changes to a liquid.
冷凝将气体或蒸汽转化成液体的过程
4.
"There, cooler air condenses the refrigerant and becomes heated during the process."
在那里,较冷的空气使冷冻剂冷凝,并在此过程中变热。
5.
Application of Thermal Analysis in Solidification Process of Undercooled Fe-B Alloy
热分析在Fe-B合金深过冷凝固过程中的应用
6.
Water vapor from the evaporative recovery process may be recondensed, and also reused.
蒸发回收过程产生的水蒸汽可再冷凝，也可再用。
7.
Study on Process of Secondary Cooling Solidification of CSP Thin Continual Casting Slab;
CSP薄板连铸坯二次冷却凝固过程的研究
8.
Application of evaporative condensator in PVC production
蒸发式冷凝器在聚氯乙烯生产过程中的应用
9.
Effect of Condenser Pipe Temperature on Vacuum Cooling of Vegetables
凝水管温度对蔬菜真空预冷过程的影响分析
10.
Experimental study of blockage in condensation heat exchanger during biomass pyrolysis
生物质热解过程冷凝用换热器堵塞的实验研究
11.
Construction Process Control of the Tube-shaped Concrete Appearance of a Cooling Tower
冷却塔筒壁混凝土外观的施工过程控制
12.
Studies on Heat Transfer with High Fractional Noncondensable Gas in Dewvaporation Desalination Process;
露点蒸发淡化过程中含高分率不凝气的蒸汽冷凝传热研究
13.
On the basis of theory analysis of heat transfer process and major parameters in finned tube condensing heat exchanger, a method is derived for calculating heat exchange of condensing finned tube heat exchanger.
分析了冷凝翅片换热器传热过程和主要参量，提出了天然气热水器冷凝翅片换热器的设计方法。
14.
"In distillation, a condenser transforms vapour to liquid."
在蒸馏过程中,把蒸汽转变成液态的装置称为冷凝器。
15.
Distillation Vaporization of a liquid and subsequent condensation of the resultant gas Back to liquid form.
蒸馏 :把一种物质先转变成蒸气,再冷凝成液体的过程。
16.
Effect of Initial Condition on Temperature Distribution and Steam Condensation Behavior during CMT Drainage;
CMT排水过程中初始参数对流体温度分布及冷凝特性影响研究
17.
Multi-cycle Numerical Analysis on the Local Cooling Capacity of Mould during Casting Solidification Process;
铸造凝固过程中模具局部冷却能力的多循环数值分析
18.
Modeling and Characterization of the Solidification of Mono-Sized Sn-5wt.%Pb Droplets Produced by the Uniform Droplet Spray Process;
对均匀颗粒快速凝固过程的研究及其冷却行为的预测