1.
allowable operating current range
容许工作电流范围 -气敏元件
2.
Influence Scope of AC Network by DC Grounding Electrode Rated ±800 kV
±800kV直流接地极对交流电网的影响范围
3.
The lamp indicates the Maximum current for range 40％～100％.
电流光柱指示最大相电流。显示范围40％～100％。
4.
With wide range to adjust current,it can weld plates with various thickness.
电流调节范围宽，可适合多种板厚的焊接。
5.
Full-load range zero-voltage zero-current soft-switching inverter arc welding power supply
全负载范围零压零流软开关焊接逆变电源
6.
After the energization of station system commissioning, the unbalance current of all HV capacitor banks is within permitted.
在实际调试送电后电容器组的不平衡电流均在允许范围内。
7.
The Restrain Range Selecting of High-Voltage Capacitance of Optimizing Design of Filters at AC Side of Converter stations
换流站交流滤波器优化设计中高压电容约束范围的选取
8.
the entire frequency range of electromagnetic waves.
电磁波的全部频率范围。
9.
slewing range
(步进电机的)变速范围
10.
"when using, make sure the both currents are within the permissible values"
当使用时,必须确信这两个电流都在允许范围之内。
11.
"Once activated, the Output Circuit continues in a "hold"mode for as long as the user remains within the effective range of the Sensor. "
在使用者位于感应器有效范围之内时,输出电流始终处于"待机"状态。
12.
The process features simple operation, wide operating range, high current efficiency and fast deposition speed.
该工艺操作简单,工艺范围宽,电流效率高,沉积速度快。
13.
Dynamic Characteristics and Vibration Control of Sandwich Beams Filled with Electrorheological Fluids Undergoing a Large Overall Motion;
大范围运动电流变夹层梁的动力学特性与振动控制
14.
Research on Wide-range & High-precision Speed Control of System Rear-earth Permanent Magnet BLDCM;
稀土永磁无刷直流电机宽范围高精度转速控制研究
15.
Research on DC Power Supply of Wide Range Input Voltage for Underground Work
适合地下工作的宽范围输入直流稳压电源的研制
16.
Each unit should include a main switch and ammeter with a scale of about 20 ampere capacity.
每一套装置应包括一个主开关和电流表，电流表的刻度范围约20安培。
17.
The field current required to produce a constant voltage at the generator terminals varies over a wide range for various loads and power factors.
稳定发电机端电压所需要的励磁电流,因负荷和功率因数的不同,其变化范围很大。
18.
In the term of restoration reconfiguration, it is necessary to assure that all lines current and nodes voltage are in the limits of safety.
故障恢复过程中保证所有的线路电流或节点电压在安全范围限度内。