1.
winch drum sliding clutch
绞盘鼓筒滑动离合器
2.
slip-jaw clutch
波纹齿滑动式离合器
3.
a friction clutch that will slip with the torque is too great.
用转矩滑动的摩擦离合器。
4.
slip friction clutch
安全打滑摩擦离合器
5.
Study on smooth start device with hydraulic slip clutch in a mill
磨矿机液压滑差离合器软起动装置研究
6.
Model Parameter Identification and Sliding Mode Control of Automobile Clutch Driven Disk Test Machine
离合器从动盘测试机模型参数辨识与滑模控制
7.
Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the position“ normal”, and the annunciator“ pneumatic control” is lit on.
转旋转滑阀手柄15和离合器手柄到正常位置，信号器“气动控制“灯亮。
8.
Turn both handles of the rotary slide valve( pos. no.15) and the clutch to the emergency position, and the annunciator“ emergency” is lit on.
转动旋转滑阀15和离合器手柄到应急位置，指示器“应急“灯亮。
9.
Research on Slip Control of Lock-up Clutch in Torque Converter;
液力变矩器闭锁离合器滑摩控制研究
10.
By placing the clutch on the driven pulley, the pulley can remain spinning even when the car is stopped.
将离合器安装在从动轮上，即使停车时滑轮也能够连续旋转。
11.
Caution: Do not get any trace of oil or grease on the friction-disk facings. Even small traces may cause clutch grabbing or slipping.
注意:摩擦盘表面不能留有油迹和润滑油脂,即使是细小的油迹均可引起离合器的抖动和打滑
12.
Provides the remarkable oil film strength,prevented the coupling slips.
提供卓越的油膜强度，防止离合器打滑。
13.
Electromechanical Actuator Controller Based on Discrete Sliding Mode Variable Structure
电动舵机离散滑模变结构控制器研究
14.
Optimal Slip Control about Lock-up Clutch of Torque Converter
液力变矩器闭锁离合器的最优滑摩控制
15.
Over a period of time the motor is required to make up the friction losses and the losses in the clutches when they are slipping.
在整个工作时间里，电动机需要弥补摩擦损失和离合器滑动时所造成的损失。
16.
self-shifting synchronizing clutch
自动移位同步离合器
17.
full auto washing machine clutch
全自动洗衣机离合器
18.
power trip lever
自动起落器离合操纵杆