1.
Tighten gear mounting bolts to specification.
根据规定拧紧齿轮安装皮带。
2.
Allow the ring gear to cool down before installation on the enginPlace flywheel on work bench and let it cool in normal shop air.
在环齿轮安装到引擎上之前，可以用冷却环齿轮。把飞轮放在工作台上，让它在正常的温度中冷却。
3.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
4.
REMOVAL W/PINION REMOVED
拆卸w/安装的小齿轮
5.
gear wheel drive
齿轮传动齿轮传动装置
6.
"They are usually equipped with fixing bolt holes, internal or external gear, lubrication holes and sealing elements."
该产品一般都带有安装孔、内齿轮或外齿轮、润滑孔和密封装置
7.
The tucker discs are fitted to gear-boxes that are connected to the main drive.
盘须安装在齿轮箱上——该齿轮箱与主传动装置相连。
8.
Install the upper side gear and clutch disc pack.
安装顶部侧齿轮和离合器片组件。
9.
Install pinion front bearing, if necessary.
如需要，安装小齿轮前轴承。
10.
Aligning and installation of gear case of main engine in the course of reequipment
某船主机齿轮箱装复过程中的校中与安装
11.
spur type planetary gearing
正齿式行星齿轮装置
12.
pinion-and-rack steering
小齿轮和齿条转向装置
13.
pinion-and-rack steering device
齿轮齿条式转向装置
14.
rack and pinion gear
齿条与小齿轮传动装置
15.
The rotation of this gear on a hub or shaft drives other gears, which may rotate faster or slower, depending upon the number of teeth on the Basic wheels.
安装在衬套或轴上的齿轮的旋转带动其它齿轮转动,并根据基轮的齿数加快或放慢速度。
16.
Research on Gear Pump Installment Application and Major Parts Repair;
齿轮泵安装使用及主要零件修复的研究
17.
equipped with or connected by gears or having gears engaged.
装有齿轮、用齿轮连接或者齿轮相互啮合。
18.
double geared drive
二极齿轮传动二极齿轮传动装置