1.
Power window operation after ignition off feature.
点火关闭后电动窗的作用之性能。
2.
Turn ignition off, then turn ignition on.
关闭点火，然后打开点火。
3.
TURN IGNITION OFF, THEN TURN IGNITION ON (ENGINE OFF).
关闭点火，然后开点火（引擎关闭）。
4.
Ignition Sw Out (Start)
点火开关关闭（开始）
5.
WARNING: TURN IGNITION OF
警告：关闭点火装置。
6.
TURN IGNITION OFF, THEN IGNITION ON.
关闭点火器，然后打开点火器。
7.
Fused Ign Sw Output (Off/Run/Start)
熔断点火开关输出（OFF/RUN/START）（关闭／运行／启动〕
8.
TURN IGNITION FROM THE OFF POSITION TO THE ON (RUN) POSITION.
把点火开关由关闭位置转到打开（运行）位置。
9.
FOG LAMPS ARE DIM WITH ENGINE IDLING OR IGNITION TURNED OF
引擎以怠速运转或点火开关关闭时，雾灯熄灭。
10.
When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition key is turned off.
当连接黄色电源线时，即使点火钥匙关闭，也总是向记忆电路供电。
11.
After regulation, turn the burner off and on again several tomes to check that ignition occurs correctly.
调节后，关闭燃烧器然后再启动多次检查点火的正确性。
12.
Switch on the ignition, close the choke and suck gas into the intake of the carburetor by flipping the propeller over counter-clockwise.
打开点火系统电源,关闭阻气阀逆时针拨动螺旋桨让油进入化油器。
13.
"The ignition distributor has two jobs. First, it closes and opens the circuit between the Battery and the ignition coil."
点火系统的分电器有两个作用。首先,负责接通和关闭蓄电池和点火线圈之间的电路。
14.
Turn the ignition off, then turn the ignition on.
关掉点火，然后打开点火。
15.
Ignition timing devices. The contact points must be timed to close and open in proper relation to the piston positions in the cylinders.
点火正时装置:触点必须能够在活塞处于气缸中相关位置时,按时关闭和开启。
16.
Turn ignition on (engine off).
点火开关打开（引擎熄火）。
17.
Fire Door Keep Locked Shut
请保持防火门关闭并锁住
18.
KEY OFCLOSE ALL DOORS TO ENSURE COURTESY LAMP(S) IS OF
熄火。关闭所有门确保上车灯是熄灭的。