1.
Study and Development of the Three-way Catalytic Converter and Mat Evaluation Test Systems;
三效催化转化器及陶瓷密封衬垫评价系统研究与开发
2.
joint gasket- or packing- type, of laminated metal foil
层压金属箔密封或填密封式接合衬垫
3.
Clean the injector port, replace critical injection port seals, replace injection port liners, and change septa as needed.
清洗进样口，如有必要，更换密封垫，衬管，隔垫。
4.
joint gasket- or packing- type, of metal sheeting combined with other material (e.g. asbestos, felt, paperboard)
金属片与其他材料（例如,石棉、毡、纸板）的静密封或填密封式接合衬垫
5.
The products consist of asbestos, rubber and packing , and are make by compression.
本产品是选用优质石棉、橡胶及填料，经过滚压制成的衬垫密封填料。
6.
gasket and similar joint, assortments or sets, of any materials dissimilar in composition, put up in pouches, envelopes, boxes etc
密封垫及类似接合衬垫,成套或各种不同种类,任何结构不同材料制成,装于袋、套、箱等
7.
Pay especially careful attention to the packing and gasket materials as this may limit the rating as is the case with PTFE used as the standard in Aloyco valves.
要特别注意密封材料和衬垫材料,这些材料相当程度上决定了阀门的压力-温度额定值
8.
All sponge rubber packing for watertight doors need to be renewed.
所有水密门的多孔橡皮密封垫换新。
9.
The primary function of sealing gasket is to prevent gas from leakage.
密封垫圈的主要作用是防止气体泄漏。
10.
The rubber seal be designed to keep out all the moisture
橡胶的密封垫是用以隔绝湿气的
11.
The hard sealing gasket also can absorb the noise and vibration.
⑵密封垫圈也可吸收噪音及振动。
12.
The rubber seal is designed to keep out all the moisture.
橡胶的密封垫是用以隔绝湿气的.
13.
calculation for bolt force of metal flat gasket
金属平垫密封的螺栓力计算
14.
Ultra-high vacuum flange--Copper seal gaskets
GB/T6071.3-1985超高真空法兰用铜密封垫
15.
Bite type tube fittings--Tipping washer
GB/T3762-1983卡套式管接头用尖角密封垫圈
16.
a gasket to seal a cylinder head.
一种密封汽缸盖顶的垫圈。
17.
This collar acts as a kind of gasket.
这个翻边起一种密封垫的作用。
18.
it was stored in a tube with a break seal.
它保存在一个有断裂密封垫的试管里。