1.
Regeneration Technique by Surface Strengthening for Stator Seat of Hydraulic Torque Converter
液力变矩器导轮座的表面强化再生技术
2.
Flat seating faces for low and medium pressures.
适用于中低压力的平面阀座表面。
3.
The building was faced with beautiful stones.
这座建筑物的表面用美丽的石头装饰。
4.
Fully guided wedge reduces wear on seating surfaces.
全导向楔板减少阀座表面的磨损。
5.
The building was refaced with beautiful stones.
这座建筑物用美丽的石头重修表面。
6.
Disc is guided by the mating surface of the seat.
可通过所匹配的阀座表面导引阀瓣。
7.
Hardened Seating Surfaces– both disc and body seating surfaces are hard faced for maximum service life.
(4) 硬化的阀座表面–阀瓣和阀体地阀座表面都经过表面硬化，最大限度延长使用寿命。
8.
Disc– machined seating surface is mated to seat ring for positive shutoff.
(4) 阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
9.
Disc ? machined seating surface is mated to seat ring for positive shutoff.
阀瓣-机加工阀座表面，配置阀座环，实现积极有效的关闭。
10.
A groove or flange designed to hold a beveled edge, as of a watch crystal or a gem.
宝石座用来固定斜面的沟槽，如钟表或宝石的
11.
Hardfaced seating surfaces, large diameter hinge pins, and corrosion resistant bearing surfaces help lengthen operating life in tough surfaces.
经过硬面处理的阀座表面，大直径铰链销，以及防腐蚀轴承表面，有助于延长坚硬表面的使用寿命。
12.
The backseat, disc and seat ring seating surfaces of all of our valves are hardfaced for long service life.
我们所有阀门的后座、瓣和阀座环表面都经过硬面处理，使用寿命更长。
13.
Trim numbers with H have cobalt alloy hardfaced seat ring facing.
带有H的阀内件型号具有钴合金硬面阀座环表面。
14.
The molded PTFE ring is bonded into a seat ring groove in the face for maximum service life.
这种模铸聚四氟乙烯环粘合在阀座表面的阀座环槽内，最大限度延长使用寿命。
15.
A. Athletic Fish-Eye Seat Base is the upgrade of enhanced rubber seat with superficial flinty processing, non-loudness.
竞技鱼眼上座，是在强化橡胶上座的再一次升级，表面硬质加工处理，不易产生声响。
16.
Addition of chamfering shape on seating surface of joint bolt at atf cooler pipe area.
倒棱增加物的塑造在自动制冷管的范围内、头螺栓的座套表面。
17.
Make construction drawing， component drawing and BOM.
座椅面套结构图的编制，零件图的绘制，BOM表的编制。
18.
a seat at the rear (especially the backseat of an automobile).
后面的座位（尤其是指汽车的后座）。