1.
A Three-Dimensional Finite Element Analysis on the Influence of Different Depth of Thread on Biomechanical Properties of Micro-Implant-Bone Interface
不同螺纹深度微小种植体的生物力学三维有限元研究
2.
basic crest truncation
基准螺纹牙顶切除高度
3.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
4.
" Bolts, screws and studs--Nominal lengths, and thread lengths for general purpose bolts"
GB/T3106-1982螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度
5.
Side view of fillister head slotted screw with adjustable thread length.
螺纹长度可调整的槽头螺钉的侧面图。
6.
Side view of roundhead screw with adjustable thread length.
螺纹长度可调整的圆头螺钉的侧面图。
7.
Side view of square head bolt with adjustable thread length.
螺纹长度可调整的方头螺栓侧面图。
8.
Side view of wing screw with adjustable thread length.
螺纹长度可调整的翼形螺钉的侧面图。
9.
depth gauge [tyre]
胎纹深度测量器〔轮胎〕
10.
They can often be used to remove fine or shallow scratches and swirls, but they will not remove any scratch that is deep enough to place your fingernail into.
它们通常可去除浅的或螺旋纹，但它们不能去除深度的划痕，即你用手指可感触得到的。
11.
Side view of square nut. Selection box height represents thread diameter.
方螺母的侧面图。选择框高度代表螺纹直径。
12.
Side view of wing nut. Selection box height represents thread diameter.
翼形螺母的侧面图。选择框高度代表螺纹直径。
13.
Side view of raised countersunk posidriv screw with adjustable thread length.
螺纹长度可调整的半埋头十字槽螺钉的侧面图。
14.
Side view of countersunk slotted screw with adjustable thread length.
螺纹长度可调整的埋头一字槽螺钉的侧面图。
15.
Side view of panhead posidriv screw with adjustable thread length.
螺纹长度可调整的平头十字槽螺钉的侧面图。
16.
Side view of panhead slotted screw with adjustable thread length.
螺纹长度可调整的平头一字槽螺钉的侧面图。
17.
Side view of countersunk posidriv screw with adjustable thread length.
螺纹长度可调整的埋头十字槽螺钉的侧面图。
18.
Side view of raised countersunk slotted screw with adjustable thread length.
螺纹长度可调整的半埋头一字槽螺钉的侧面图。