1.
ADJUSTED PRESSURE/ TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/度额定值?
2.
ADJUSTED PRESSURE/TEMPERATURE RATINGS FOR JOINTS MADE OF COPPER TUBE AND SOLDER END VALVES?
在连接铜管和焊接端口阀门时要核对压力/温度额定值?
3.
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
4.
When installing solder end valves, conventional soldering techniques should be used.
安装焊接连接端口的阀门时，应该采用普通焊接技术。
5.
Three lead wires are soldered to the anchor terminals.
在固定接线端子上焊有三根导线。
6.
Welding failure analysis of tin coating for the terminal electrode of MLCC
MLCC端电极Sn镀层的焊接失效分析
7.
Analysis on Welding Failure of Terminal Electrode of Multilayer Ceramic Capacitors by SEM
基于SEM的MLCC端电极焊接失效分析
8.
End Connections– choice of flanged, threaded or socket weld ends.
(13) 连接端口-可提供法兰、纹或焊接连接端口供用户选择。
9.
End Connections– choice of flanged or socket ends for piping flexibility.
(3) 连接端口-根据连接管道的情况，可选择法兰或承插焊连接端口。
10.
End Connections ? choice of flanged, threaded or socket weld ends.
连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
11.
Remove excess solder with small brush while plastic( soft), leaving a fillet around end of valve as it cools.
在焊接部分成型后，用小刷子清除多余的焊料，使其在焊料冷却后形成一个环绕连接端口的圆角。
12.
Design on EMC of input for inverter welding power source
逆变焊接电源输入端口的电磁兼容设计
13.
A WELDING TECHNIQUE ON END RING OF ROTARY CAR DUMPINGFROM AMERICAN IMPORT;
美国引进翻车机安装中的端环焊接工艺
14.
The Solution for Unacceptable LSAW Linepipe End Diameter
大口径直缝焊接钢管管端直径超差的处理方法
15.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
16.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
17.
Usually, glass insulated terminals are either soldered or cemented into the throughhole in the case.
通常是把玻璃绝缘接线端焊接或者是粘合在壳体上的通孔内。
18.
Effects of Several Factors on Plastic Zone at the Cracking Tip of Welded Joint with FEM;
采用有限元分析多因素对焊接接头裂纹尖端塑性区的影响