1.
Round wire circlips
GB/T921-1986钢丝锁圈
2.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
3.
piston pin snap ring
活塞销锁圈, 活塞销扣环
4.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
5.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈
6.
Lock ring with scre
GB/T884-1986螺钉锁紧挡圈
7.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
8.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
9.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
10.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
11.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
12.
"and he still wore the torque, the precious jade, a lock-shaped amulet containing his Buddhistic name, and a lucky charm."
"仍旧带着项圈,宝玉,寄名锁,护身符等物"
13.
something created by interlocking looped stitches with a hooked needle.
通过用钩针互锁线圈而创造出的东西。
14.
If the aperture is set to "P" or "A", turn the aperture ding while pressing the "P" or "A" lock pin.
如果光圈要调到“P”或 “A”,请按住“P”或 “A”锁定拴同时转动光圈环。
15.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
16.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
17.
Top view of spring lock washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈的俯视图。
18.
The Frequency Calculation and Dynamic Frequency Test of Interlocked Long Blade;
整圈自锁长叶片共振频率计算与动频试验