1.
The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting.
主阀轴配置一个内轴，适用于双重调节止动记忆和阀门位置设置。
2.
SUN HYDRAULIK GMBH offers Offers to Screw-in valves, Globe valves and Valve housing.
提供轴承箱、轴承体、阀体、阀箱、阀套、阀门外壳及其它产品。
3.
Stem bearing to assure concentric stem rotation, allowing stem packing to provide maximum sealing effectiveness.
阀杆轴承保证同轴阀杆的旋转，使得阀杆填料具有最大的密封效果。
4.
In order to gain access to the seat and clapper rubber ring, you must compress the spring (#3) that surrounds the clapper shaft (#1).
为了接近阀座和阀瓣橡胶环，必须压缩环绕阀瓣轴（1号）的弹簧（3号）。
5.
Do not remove collar bushing with valve under pressure.
在阀门处于压力状态下,不要拆卸轴环。
6.
Rationality Analysis of Truck with Inertia Proportion Valve
双轴货车安装惯性比例阀合理性分析
7.
Double-door check valves have twin discs on a spring-loaded center shaft.
双门止回阀在弹簧中心轴旁配置两个对称的阀瓣。
8.
Since the engine has no valves, it doesn't need any camshaft, valve lifters and so on.
因为发动机没有阀门，它不需要任何凸轮轴、起阀器等。
9.
Backseating the valve stops any flame from traveling through the valve and connecting hose into the crankcase.
落座的阀门阻止火焰通过阀门和连接管进入曲轴箱。
10.
One-Piece Thru Shaft: Ensures dependability and positive disc positioning.
一体化贯穿轴:确保阀门的强度、可靠性合阀板的精确定位。
11.
Re-analysis of the Drive Sleeve Built-in Stem Nut in Multi-turn Electric Actuator
多回转阀门电动装置输出轴内装阀杆螺母结构的再认识
12.
"Floor stands are designed for operating gate, globe and angle valves that are installed in inaccessible places under a floor."
为了操作那些安装在地下、难于接近的闸阀、截止阀和角阀,我们设计了地轴架。
13.
The NIBCO valve figure number and size must also be furnished and specify valve stem coupling for use with floor stand.
另外还要提供尼伯科阀门型号和尺寸,并说明所要采用的阀门阀杆与地轴架的连接装置。
14.
"The top flange of an extension stem, plug shaft diameter, and distance across flats on plug shaft are the same size as the valve selected."
延长阀杆的顶部法兰、塞轴直径、和塞轴上的平台两边距离应该与所选择的阀门尺寸相同。
15.
Studies on the Technical Rebuilding for the Check Valve in the Blast Furnace Axial Flow Air Compressor System;
高炉轴流风机系统的止回阀技术改造研究
16.
The Research on Autocontrol Protection System for the Check Valve of Axial Flow Fan;
高炉轴流风机止回阀自控保护系统的研究
17.
Design on the valve used for axis flows blower control system
轴流式高炉风机控制系统用防喘振阀的设计
18.
Application of Proportional Relief Valve in Hydraulic Loading System of Tension Bearing Test Equipment
比例溢流阀在轴承试验液压加载系统中的应用