1.
Distortion controlling of 40Cr steel camshaft double-gear during salt bath nitrocarburizing
盐浴氮碳共渗40Cr钢凸轮轴双联齿轮的变形控制
2.
liquid carbonitriding
液体碳氮共渗, 液体渗碳氮化法
3.
Gas Nitrocarburzing for 4Cr5MoSiV1 Steel
4Cr5MoSiV1(H13)钢的气体氮碳共渗
4.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
5.
aerated bath nitriding
吸风盐浴软氮化;通气液体氮化;空气搅拌液体渗氮法
6.
Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;
合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究
7.
The Study of Salt Bath Rare Earth (RE )--Boriding of 45 Steel at Low Temperature
45钢(α+γ)双相区温度盐浴稀土硼共渗的研究
8.
new technology of ionitro-carbon-titanizing
离子氮-碳-钛三元共渗新工艺
9.
Investigation of Plasma Electrolytic Carbonitriding Technique in Solution;
液相等离子体电解碳氮共渗技术研究
10.
RE-nitrocarburizing Technology for Piston Rod Made of 40CrMnMo
40CrMnMo活塞连杆稀土离子氮碳共渗工艺
11.
RE-B-C-N multi-element penetration of 65Mn steel metal rubber with larger wire diameter
大丝径65Mn金属橡胶稀土硼碳氮共渗
12.
Influence of nitrocarburizing on microstructure and roughness of 4Cr10Si2Mo steel
氮碳共渗对4Cr10Si2Mo钢渗层组织和表面粗糙度的影响
13.
Research on Ion-nitrocarburizing Processes and Mechanism with N_2 and CH_4 for 40Cr;
40Cr钢氮气—甲烷离子氮碳共渗工艺及机理的研究
14.
Effect of microstructure of nodular cast iron on its nitrided layer depth and wear resistance by QPQ process
球铁基体组织对QPQ盐浴渗氮层深度和耐磨性的影响
15.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
16.
Research Hydrogen-free Carbonizing and Hydrogen-free Carbonitriding on Titanium and Titanium Alloy Ti6A14V by Double Glow Plasma Discharge;
钛及钛合金Ti6A14V双层辉光离子无氢渗碳及无氢碳氮共渗的研究
17.
It was investigated that chromizing in borax salt bath and melting hydrochloride.
研究了硼砂盐浴渗铬和氯系熔盐渗铬。
18.
The heat treatment technology of carbo- nitriding of steel has the characteristic of lower treatment temperature and direct quenching.
钢的碳氮共渗热处理工艺具有共渗温度低、直接淬火等特点。