1.
Optimization of Texturing Parameter for Low Roughness And High Peaks in Work Roll;
低粗糙度高峰值数轧辊毛化参数的优化
2.
Exploration of low roughness grinding technology in bearing raceway processing
低粗糙度磨削技术在轴承滚道加工中的探索
3.
a rough preliminary model.
一种很粗糙、低等的模型。
4.
A New Method for the Roughness Measure of a Fuzzy Set;
模糊粗糙集中依参数粗糙度的新算法
5.
P-rough integrals and the rough degree of function two-direction S-rough sets
P-粗积分与函数双向S-粗集的粗糙度
6.
The quick mark of the surface roughness in AutoCAD;
AutoCAD中表面粗糙度的标注
7.
The grinded roughness may be 40% of the roughness to be textured.
磨削而成的粗糙度可能是将要打毛粗糙度的40%？
8.
Strip roughness must not exceed 40 microinch (1.0 micron) in order to achieve these minimum coat weights.
板面粗糙度不能超过40微寸(1.0微米),以达到最低镀层重量。
9.
Influence of Face Roughness and Static Stator Angular Misalignment on Steady-state Behavior of Low Speed Dry Gas Seal
端面粗糙度及静环静态角偏差对低速干气密封稳态特性的影响
10.
Influence of Ultrasonic Deep Rolling on Reducing Surface Roughness and Healing Surface Scar of TC4 Titanium Alloy
超声深滚降低TC4钛合金表面粗糙度和修复表面损伤的作用
11.
Variable precision rough sets and Bayesian classification of rough set image classification
变精度粗糙集与贝叶斯粗糙集图像分类研究
12.
The amorphous layer had more compact structure, higher hardness, lower roughness and higher electrical resistance.
结果表明，该非晶层相对于直接阳极化层，组织致密、硬度高、粗糙度低、电阻高。
13.
Paper and board--Determination of the roughness (Bendtsen method)
GB/T2679.4-1994纸和纸板粗糙度的测定法(本特生粗糙度法)
14.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.
导纱杆表面粗糙度的作用超过纤维表面的粗糙度。
15.
Effect of pH on Roughness of InSb in CMP
CMP中酸碱度对InSb晶片粗糙度的影响
16.
Abstract Three methods have been used to experimentally determine the roughness function (DU+) for several rough surfaces.
三种方法已被用来实验确定粗糙度函数数粗糙表面。
17.
Fractal measurement and characterization on roughness of coarse aggregate surface texture
粗集料表面纹理粗糙度的分形测量和描述
18.
arithmetical mean deviation of the (roughness) profile
(粗糙度)轮廓的算术平均偏差