1.
TORSIONAL IMPACT RESPONSE OF A CYLINDRICAL CRACK IN A FUNCTIONALLY GRADED PIPE
功能梯度管环形裂纹扭转冲击特性分析
2.
Propagation and Environmental Propagation of the Indentation Crack of Ferroelectric Materials;
铁电材料压痕裂纹的开裂与环境开裂
3.
develop a fine network of cracks.
形成一个网状的裂纹。
4.
The axial-symmetric ring-shaped interface crack problems are discussed under tension loading.
讨论受拉伸载荷作用的轴对称环形片状界面裂纹问题。
5.
On the Scattering of SH-Wave by Interface Crack and Circular Cavity near the Interface;
界面含裂纹圆环形衬砌对SH波的散射及动应力集中
6.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
7.
The formation of cracks on the surface of paint layers.
油画层皱裂油画表层裂纹的形成
8.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
9.
FRACTURE TOUGHNESS MEASUREMENT OF CAST MAGNESIUM ALLOY BY CYLINDRICAL SPECIMEN WITH RING-SHAPED CRACK
用环状裂纹圆柱试样测定铸镁合金的断裂韧度
10.
Cause Analysis of Cracks on SH150 Elevator Link
SH150型双臂吊环裂纹成因分析
11.
A STUDY ON FATIGUE CRACK INITIATION AND SMALL CRACK GROWTH UNDER THE CYC LIC COMPRESSIVE LOAD CONDITION
压缩循环加载下缺口裂纹的萌生与小裂纹扩展规律研究
12.
Effects of the Surface Perturbation and the External Stress on the Evolutons of Microcracks;
裂面形貌扰动和外载对微裂纹演变的影响
13.
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
14.
The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.
裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。
15.
THE STRESS AND DEFORMATION OF bridge BAR OF QUASI-BRITTLE MATERIAL CRACK
准脆性材料裂纹桥联筋的应力与变形
16.
BEM Model of ultrasonic scattering field for penny-shaped crack in solid
固体中币形裂纹散射声场边界元模型
17.
Morphological Recognition Method of Aircraft Skin Cracks
飞机蒙皮裂纹的数学形态学识别方法
18.
Mechanism of Crack Formation During Continuous Casting of Peritectic Steel Slabs
包晶钢铸坯裂纹形成机理的实验研究