说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 剪切裂缝
1.
The elastostatical problem of the energy release in a shear crack was first created by Starr (1928).
剪切裂缝中能量释放的弹性静力问题最先由Starr(1928)进行了研究。
2.
Impact of Crack's Shear Transferring Coefficient on Reinforced Concrete Beam
裂缝剪切传递系数对钢筋混凝土梁开裂的影响
3.
A Study on Shear Fracture Process and Fracture Toughness of Joint-grouting in Concrete Dam;
混凝土大坝接缝灌浆缝剪切断裂过程及其断裂韧度的研究
4.
Non-linear Finite Element Analysis of Reinforced Concrete Considering Crack Shear-Slip Effect
考虑裂缝剪切滑移的钢筋混凝土非线性有限元分析
5.
Analysis of FEM on behaviour of steel-reinforced concrete composite beam with shear(Ⅰ)--Load-dformation and crack formation and development
SRC组合梁剪切性能的有限元分析(Ⅰ)——荷载变形和裂缝发展过程
6.
Analysis of the Cause of Shear Wall Cracking on the Core of Leatop Plaza and Study on Crack Control
利通广场核心筒剪力墙裂缝形成原因分析及裂缝控制研究
7.
Study on Initial Deformation Cracks on Shear Behaviour of R.C. Beam;
变形裂缝对混凝土梁抗剪性能的影响研究
8.
Experiment Study on Shear Crack Width of HRB400 RC Beams;
HRB400钢筋混凝土梁受剪斜裂缝宽度的试验研究
9.
The Study on the Cracks Development Law and the Failure Mode of the Composite Wall
复合剪力墙板裂缝发展规律及破坏模式的研究
10.
The interlayer crack reasons and treating measures of a tall frame wall structure
某高层框剪结构夹层裂缝成因和处理措施
11.
Experimental study on diagonal cracks of steel fiber reinforced concrete shear walls
钢纤维混凝土剪力墙斜截面裂缝试验研究
12.
Dynamic characteristics of fixedly supported beam with cracks under shearing load
固支裂纹梁在剪切载荷下的动态特性
13.
Sub-critical crack growth length of shear (Mode Ⅱ) fracture of rock
岩石剪切亚临界裂纹扩展长度的研究
14.
Analytical Solutions for the Anti-plane Problems with an Arc crack
圆弧裂纹的反平面剪切问题的解析解
15.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
16.
Seam Ripper: for ripping out unnecessary stitches and for opening machine-stitched buttonholes.
拆缝器:用来拆除不需要的线迹或剪切纽洞。
17.
Shear Stiffness Prediction of Stitched Composite Sandwich Structure with Foam Core
缝合复合材料泡沫夹芯结构剪切刚度预报
18.
Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures
高温后正面角焊缝抗拉剪切强度的试验