1.
Work roll non-uniform wear and shape control performance of the 2250 hot temper mill in WISCO
武钢2250热轧平整机不均匀磨损及板形调控特性
2.
"Such conditions as these will cause uneven bearing wear, with some bearings wearing faster (and more unevenly) than others. "
类似这样的情况会造成轴承不均匀磨损,而且一些轴承会比另一些磨损得更快。
3.
This causes uneven regulation and excessive stem wear.
这将导致调节不均匀和阀杆磨损过度。
4.
Use of the bearing oil leak detector will determine whether or not bearing wear has been uneven.
使用漏油检测装置即可判定轴承磨损是否均匀。
5.
Analysis and improvement of asymmetric abrasion of C_0-C_0 locomotive wheel flange
C_0-C_0轴式机车轮缘磨耗不均匀的分析及改进
6.
ROTATE TIRES: Another way to promote even tire wear is to rotate tires.
轮换车胎：轮换车胎是增强轮胎均匀磨损的又一办法。
7.
Application of Uniform Design on Studying the Wear resisting Design Criterion for C/Cu Composite Material;
均匀设计在研究C/Cu复合材料耐磨损设计准则中的应用
8.
colour lacking uniformity
色不匀,色缺乏均匀
9.
As uneven plaid is uneven both horizontally and vertically.
不均匀格子布横向、竖向都是不均匀的。
10.
About 25.4% of the carcinous thyroid nodes showed homogeneous echo, and 62.9% showed unhomogeneous echo.
内部回声均匀占25.4%,不均匀占62.9%;
11.
An unevenly worn tread indicates an alignment or tire inflation problem.
轮胎磨损不均表明车轮定位或轮胎充气有问题。
12.
"If the bearings seem to have worn fairly uniformly, then the chances are that only crankshaft-journal checks and bearing replacement will be required."
如果轴承看上去似乎已磨损的相当均匀,那么只需要检查曲轴轴颈并更换轴承。
13.
Surface options: smooth and folded. Its surface has resistance performance of acid, alkali, corrosion and worn. Option colors: over100 types.
表面分光滑、纹二类，色泽均匀、有极强的耐酸、灰浆、撞击、磨损等特点。数百种色彩供您选择。
14.
Among these physical properties are appearance, wear resistance, hardness or brittleness, residual stress, porosity, thickness, and deposit uniformity.
这些物理性能有外观，抗磨损性，硬度或脆性，残余应力，孔槨率，厚度和沉积层的均匀度。
15.
The Research on the Unevenness and Unexpected Failure of Textile Based Vascular Prostheses
纺织基人造血管管壁不均匀特性与破损现象的研究
16.
A light fixture, such as a frosted globe, that spreads light evenly.
均匀散射灯灯光装置，例如磨砂灯泡，可均匀地散播光线
17.
the patient is breathing irregularly.
病人的呼吸很不均匀。
18.
inhomogeneity of carbide
碳化物不均匀性级别