1.
Application and Properties of Slab Sizing Press Module with Surfacing Welding
表面堆焊制备侧压机模块的性能及应用
2.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
3.
Welding Technique of Automatical Hidden Arc Overlay Welding for Matching Surface Between Bell and Hopper of Blast Furnace
高炉料钟、料斗配合表面自动埋弧堆焊焊接工艺
4.
Fabrication and characterization of nanocrystructured surface layer of J507 weld by ultrasonic impact peening
J507堆焊层超声冲击表面纳米化
5.
Study on Wear Resistance of the Electrodes of Cr13 Alloy System for Valve Sealing Surface;
Cr13系阀门密封面堆焊焊条耐磨性的研究
6.
New Stainless Steel Heap Welding Technique for Main Steam Valve Sealing Suface
主蒸汽阀门密封面不锈钢堆焊新工艺
7.
internal undercut
焊道底边或内表面咬肉
8.
Process model of arc corrugation on friction-stir weld
搅拌摩擦焊焊缝表面弧形纹形成模型
9.
Study on the Surface Coating of Welding Wire of CO_2-Gas Shielding Arc-Welding;
CO_2气体保护焊焊丝表面涂层技术探索
10.
By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired.
采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。
11.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
12.
Large Area Surfacing Wear-resistant Composite Plate--Alloy Powder Surfacing with Self-shielded Flux-cored Wire Welding
大面积耐磨复合板堆焊—自保护药芯焊丝外添加合金粉工艺研究
13.
Deposit and Metallurgical Behavior of Nitrogen-alloying Hardfacing Alloy
氮合金化堆焊硬面合金及其冶金行为研究
14.
By enhancing welded construction's rigidity and both side alternative surfacing, the problem of tube plate deformation was solved.
采用提高刚性和正反面交替直道堆焊等方法解决了蒙乃尔合金换热器管板堆焊的变形问题。
15.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
16.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
17.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
18.
nozzle for gas-operated blowippe welding and surface-tempering machines
气动熔焊机器、焊接和表面回火机器用喷嘴