1.
Study on Structure and Capabilities of Nickel-Base Deposit Alloy in Inverter Controlled Longitudinal Magnetic Field;
镍基堆焊合金在逆变交流纵向磁控下组织性能的研究
2.
Study of Wear-resisting Mechanism and Plasma Arc Surfacing of Ni-based Alloy Powder;
镍基合金粉末等离子弧堆焊及耐磨机理的研究
3.
Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings
等离子喷焊镍基合金碳化钨复合涂层
4.
The Welding of Nickel-base High Temperature Alloy Tube by HP40Nb and HP45NbTi;
HP40Nb和HP45NbTi镍基高温合金炉管的焊接
5.
Study on Arc Brazing of Nickel-Based Alloy and Stainless Steel;
镍基合金与不锈钢电弧钎焊工艺研究
6.
MICROSTRUCTURE AND CORROSION PERFORMANCE OF WELD JOINT OF C4 ALLOY/X60 STEEL FILLED WITH LOW ALLOY STEEL FILLER
低合金钢焊丝焊接C4镍基合金/X60钢熔合区组织与耐蚀性
7.
Study on Fe_3Al Cladding Materials;
Fe_3Al基金属间化合物堆焊材料的研究
8.
Technique analysis of surfacing 16MnR steel with Mone1400 alloy
Monel400合金/16MnR基体堆焊工艺分析
9.
Research on the microstructure of the Co-base alloy oxyacetylene welding surfacing
氧气-乙炔堆焊Co基合金显微结构研究
10.
Investigation on Solidification Cracking Susceptibility of 690 Nickel-based Welding Strip Surfacing Metal;
690镍基合金焊带熔敷金属结晶裂纹敏感性研究
11.
Failure Reason for the Nickel-based Alloy Weld Intergranular Corrosion Test
镍基合金焊缝晶间腐蚀试验不合格原因浅析
12.
INFLUENCE OF Hf ON WELD CRACKING FOR CAST NICKEL BASE SUPERALLOYS
铪对铸造镍基高温合金焊接裂纹的影响
13.
A nickel-base cast alloy with low expansion coefficient - A new material for welding clamp
低膨胀系数镍基铸造合金—新型焊接夹具材料
14.
Research on Welding Residual Stress Testing Technology for Ni-based Alloy
镍基合金的焊接残余应力测试技术研究
15.
Nickel-Based Alloy Powder Welding Properties of Laser Cladding
镍基合金粉末的激光熔覆焊接性能研究
16.
Interface structure and strength analysis of brazed GH3044 nickel-based alloy joint
GH3044镍基合金钎焊接头的界面组织和强度分析
17.
Finite element simulation of thermal stress on brazed K24 nickel-based joint
K24镍基合金钎焊接头热应力的有限元模拟
18.
Brazing of IC10 superalloy with Ni-based brazing fillers using Hf and Zr as melting-point depressants
Hf与Zr为降熔元素镍基钎料对IC10合金的钎焊