1.
BQUIVALENT LIFE METHOD FOR PREDICTING FCI LIFE EDER THE RANDM LOADING
估算谱载下疲劳裂纹起始寿命的等寿命法
2.
initiation of stable crack growth
稳态裂纹扩展的开始
3.
Crack propagation from the flameout edge can be modeled by considering an edge crack in the martensite surface from flame cutting.
裂纹从烧割边缘的扩展可模拟为一个从烧割处的马氏体表面起始的边裂纹。
4.
This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.
研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的。
5.
Influence of Gas Void and Gas Crack Defects on Electrical Tree Initiation in Silicone Rubber
气泡及气隙裂纹缺陷对硅橡胶电树枝起始特性的影响
6.
They are fatigue cracks which is mainly caused by alternating stress.
叶片裂纹是疲劳裂纹,主要由交变应力引起。
7.
Dynamic Split Tension Strength of Marble and the Properties of Crack Initiation and Crack Propagation under Dynamic Split Tests;
大理岩动态劈裂拉伸强度和裂纹起裂扩展特性
8.
Crack propagation usually begins slowly.
裂纹的增长常常是开始缓慢。
9.
Fatigue crack growth and fatigue life evaluation for welded steel bridge members with initial crack
具初始裂纹钢桥梁焊接构件疲劳裂纹扩展和疲劳寿命计算
10.
Detection of Notch Crack Initiation and Propagation by DC Potential Drop Method
缺口裂纹起裂和扩展检测的直流电位法
11.
to become, or to cause to become, covered with a network of small cracks; The blazing sun crackled the desert sand.
变得或引起覆盖上网状的小裂纹。
12.
The Main Factors Causing Die Crack in IC Assembly Process
IC封装中引起芯片裂纹的主要因素
13.
An Objective Amount for Describing lnitial Crack Length at the Notch Root
一种描述缺口根部初始裂纹长度的客观量
14.
Influence of initial stress of thin pressing parts on welding hot cracking susceptivity
薄壁冲压件初始应力对焊接热裂纹敏感性影响
15.
THE THERMORHEOLOGICAL FRACTURE RESEARCH ON THE FORMATION OF INITIAL SURFACE CRACKS AT THE SINGLE BUTTRSS DIAMOND DAM
单支墩大头坝初始表面裂纹形成的热流变断裂学研究(英文)
16.
The most important conclusion reached in this study is that cracking begins regardless of the initial loading nucleation time.
这个研究最重要的结论是：裂纹的开始与初始载荷成核的时间无关。
17.
Scattering of SH-Wave by a Semi-Cylindrical Hill Above a Subsurface Inclusion and Crack;
SH波对夹杂裂纹附近半圆形凸起的散射
18.
An analysis of causes for and prevention against rust and fissure of cranes;
浅析起重机的锈蚀与裂纹的成因及防护