1.
Comparative Analysis on Techno-economy of Two Olefin Production Processes-Naphtha Catalytic Cracking and Steam Thermo Cracking;
催化裂解与蒸汽热裂解制烯烃技术经济分析
2.
Research on the Ratio of Water Vapor to Hydrocarbon in Producting Ethylene with Steam Pyrolysis
蒸汽热裂解制乙烯汽烃比调节方案研究
3.
Lumping kinetic model of Daqing naphtha pyrolysis
大庆重石脑油蒸汽热裂解集总动力学模型
4.
EXPERIMENT OF AQUATHERMOLYSIS REACTION BETWEEN HEAVY OIL AND OVER-HEATED STEAM
过热蒸汽与稠油之间的水热裂解实验
5.
QNPP STEAM GENERATOR TUBE RUPTURE ACCIDENT ANALYSIS
秦山核电厂蒸汽发生器传热管破裂事故分析
6.
Human Reliability Analysis in Steam Generator Tube Rupture Incidents;
处理蒸汽发生器传热管破裂事故（SGTR）的人因分析
7.
A Study on Aquathermolysis for Heavy Oil Upgrading under Steam Injection Conditions
稠油注蒸汽层内水热裂解降黏实验研究
8.
Failure Pressure Analysis of SG Tube with Axial Crack
蒸汽发生器含轴向裂纹传热管的失效压力分析
9.
CAUSE ANALYSIS OF WELD SEAM CRACKING ON THERMOCOUPLE SLEEVES USED FOR MAIN STEAM PIPELINE
主蒸汽管道热电偶套管焊缝开裂原因分析
10.
The effects of combining thermal-humidity and vapor pressure on delamination of plastic packaging QFN component
集成湿热及蒸汽压对塑封QFN器件的层裂影响
11.
cooker, steam-heated, non-domestic
蒸汽加热蒸煮器,非家用
12.
fracture-assisted steamflood technology
压裂辅助蒸汽驱工艺
13.
steam air heater
蒸汽加热式空气预热器
14.
When tube wall strength can not bear inner steam pressure in the tube, blowout of low-temperature tube occurs.
当管壁强度无法承受管内蒸汽压力时，导致低温过热器管爆裂。
15.
Rupture Failure Analysis and Corrosion Mechanism Research of Steam Generator Tubes;
蒸汽发生器传热管开裂失效分析及腐蚀机理研究
16.
The Research of Steam Injection and Hot-water Injection in Cao Tai Buried Hill Construction Cracks High-condensate Oilfield
曹台潜山裂缝性高凝油藏注蒸汽及注热水开采适应性研究
17.
Discussion on Amount of Water Ingress Mass in Steam Generator Heat-Exchange Tube Rupture Accident of High-Temperature Gas-Cooled Reactor
高温气冷堆蒸汽发生器换热管断裂事故进水量影响因素分析
18.
Analysis on Water Ingress Mass in Steam Generator Heat-Exchange Tube Rupture Accident of High-Temperature Gas-Cooled Reactor
高温气冷堆蒸汽发生器传热管断裂事故进水量分析