1.
Influence of Melt Rapid Solidification Al-Ce Alloy Modification on Microstructure and Mechanical Property of ZL108
熔体快淬Al-Ce合金变质对ZL108组织和性能的影响
2.
Modification Effect of Al-Ce-P Alloy on ZL102 Alloy;
Al-Ce-P合金对ZL102合金的变质研究
3.
Study of Thermal Fatigue on Al-Cu-Mn-Ti-Ce Alloy;
Al-Cu-Mn-Ti-Ce合金热疲劳性能的研究
4.
Icosahedral Short-Range Order Within Al-Fe-Ce Alloy
Al-Fe-Ce非晶合金中的二十面体短程序
5.
The Mechanical Alloying of Fe-Ni-Al and Fe-Ni-Ce Systems;
Fe-Ni-Al和Fe-Ni-Ce三元合金的机械合金化研究
6.
Nanocrystalline and Amorphous Al-Fe-Ni-Ce Alloys Obtained by Mechanical Alloying;
机械合金化制备Al-Fe-Ni-Ce纳米晶和非晶态合金
7.
Modification Effect of Al-Ce-P Master Alloy on ZL102Al-Si Alloy
Al-Ce-P中间合金对ZL102铝硅合金的变质研究
8.
Glass Forming Ability and Crystallization of Al-X-Ce Amorphous Alloys;
Al-X-Ce合金系非晶形成能力及其晶化行为研究
9.
Electron Microscopy Investigation of Precipitates in Al-Cu-Mg-Ag(-Ce) Alloys;
Al-Cu-Mg-Ag（-Ce）合金析出相的电子显微研究
10.
Influence of Heat Treatment on Fatigue Behavior of Extruded Al-Mg-Ce Alloy;
热处理对Al-Mg-Ce变形铝合金疲劳行为的影响
11.
Mechanical Behavior of Al-Mg-Ce Alloy Processed by Equal Channel Angular Pressing
等通道转角挤压Al-Mg-Ce铝合金的力学行为
12.
Fatigue behavior of Al-4%Mg-0.3%Ce alloy processed by equal channel angle pressing
等通道转角挤压Al-4%Mg-0.3%Ce铝合金的疲劳行为
13.
Salt spray corrosion properties of the paint coatings rich in Zn-Al-Mg-Ce alloy powders
富Zn-Al-Mg-Ce合金油漆涂层的盐雾腐蚀性能研究
14.
Tensile and Fracture Behaviors of Al-4%Mg-0.3%Ce Alloy by Equal Channel Angular Pressing
等径角挤压Al-4%Mg-0.3%Ce合金的拉伸及断裂行为
15.
Mechanical properties of Al-4%Mg-0.5%Ce aluminum alloy subjected to equal channel angular pressing
等通道转角挤压Al-4%Mg-0.5%Ce合金的力学性能
16.
The Study on Phase Relations of Ce-Al-Cu Ternary System and Electrochemical Properties of Its Compounds
Ce-Al-Cu三元系合金相关系及其合金电化学性能的研究
17.
Modification Treatment of Rare Earth Nd, Ce to High Al Content Mg-Al Alloy and Research on Structure Evolvement;
高Al含量镁合金的Nd、Ce变质处理和组织演变研究
18.
Influence of heat treatment on fatigue behavior of extruded Al-4%Mg-0.3%Ce alloy
热处理对Al-4%Mg-0.3%Ce挤压变形铝合金疲劳行为的影响