1.
Study on Grain Refinement for 09CuPTiRE Steel;
09CuPTiRE钢晶粒超细化研究
2.
Research on the Grain Ultra-refinement in Austenite by Dynamic Recrystallization and Its Martensitic Transformation;
奥氏体动态再结晶晶粒超细化及其马氏体相变研究
3.
With the features of ultrafine grain, fair matching of high strength and high toughness in the ultrafine grain steel.
论述了超细晶粒钢的超细晶粒及高强度与高韧性良好匹配的特点。
4.
Development of 500MPa Φ6-12mm Ultra-Fine Grain Carbon Steel Bar
500MPa级6-12mm超细晶粒碳素钢筋开发
5.
Development of Ultra-fine Grain Earthquake-resistant Reinforced Bar HRBF500E
HRBF500E超细晶粒抗震钢筋的开发
6.
Low-Temperature Toughness for Weld Joint of 400 MPa Ultrafine Grained Steel Strip
400MPa级超细晶粒钢焊接接头的低温韧性
7.
Grain Refinement and Superplastic Behavior of 1420 Al-Li Alloy Sheets
1420铝锂合金的晶粒细化及超塑性行为
8.
Computer Simulation of Austenite Grain Growth in HAZ of Ultra-Fine Grain Steel;
超细晶粒钢焊接HAZ奥氏体晶粒长大的计算机模拟
9.
Influence of RE Modifier on As-cast Grain Refinement of Super-low Carbon Cast Steel
稀土变质剂对超低碳钢铸态晶粒细化的研究
10.
Effect of Inhibitor on Ultrafine Graened Cemented Cardedes;
晶粒长大抑制剂对超细硬质合金性能的影响
11.
Effects of External Direct Current Magnetic Field on Spot Welding Quality of Ultra-Fine Grained Steel
外加直流磁场对超细晶粒钢点焊质量的影响
12.
Controlling on Microstructure and Performances of Welding Joints of 800MPa Ultra-Fine Grained Steel
800MPa超细晶粒钢焊接接头组织和性能控制
13.
Effect of Inhibitors on Grain Size and Properties of Ultrafine Cemented Carbides
抑制剂对超细硬质合金晶粒度和性能的影响
14.
Simulation of Control Q345B Ultra-fine Grain Size during Hot Deformation by CSP
基于CSP工艺Q345B热轧变形模拟的超细晶粒控制
15.
Fabrication and characterization of ultra-fine grained pure tungsten by two fast resistance sintering technologies
两种通电快速烧结方法制备超细晶粒纯钨
16.
Evolution of ultra-fine austenite grains in Nb and Nb-V-Ti microalloyed low carbon steel under cyclic heating-quenching treatment
循环加热-淬火工艺下超细晶奥氏体的晶粒演变特征
17.
Study on Preparation of BaSO_4 Submicro-particles and Core-shell Polycarbonate/BaSO_4 Submicron Composite Particles by Solventing-out Process;
溶析结晶法制备硫酸钡超细粒子及其复合粒子的研究
18.
Special ultra fine sub micron grade for high speed milling especially for mould making.
特别适合高速铣削的晶粒度为超细的牌号，特别适合模具制造。