1.
Using the step traveling welding and making use of the computer, the penetration control in TIG welding on mild steel has been studied.
采用步进式TIG焊，利用计算机控制，对薄板低碳钢平板堆焊的熔透控制进行了研究。
2.
Build-up Welding Technique of Wear Resistance Alloy in Remanufacturing Guide Plate of a Grader
平地机导板再制造的耐磨合金堆焊技术
3.
Welding test on the belt built-up welding 304L to the 20MnMo forging pipe-steel
20MnMo锻件管板带极堆焊304L的焊接试验
4.
Simulation of Resurfacing Welding Deformation in Different Constraint
不同约束下试板中心堆焊焊接变形的模拟
5.
Skid: A platform for stacking books.
堆书板:用来堆叠书本的平台。
6.
Surfacing on Duplex Stainless Steel Tube-plate of Heat Exchanger and Welding on Tube-port of Heat Exchanging Tube
换热器管板双相不锈钢堆焊及管板与换热管管头焊接
7.
Finite element simulation of temperature field for submerged arc strip overlaying on thick plate
厚板带极埋弧堆焊温度场的有限元模拟
8.
Large Area Surfacing Wear-resistant Composite Plate--Alloy Powder Surfacing with Self-shielded Flux-cored Wire Welding
大面积耐磨复合板堆焊—自保护药芯焊丝外添加合金粉工艺研究
9.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
10.
Slip-on welding plate steel pipe flanges with flat face for PN 0.6MPa (6 bar)
GB/T9119.2-1988PN0.6MPa(6bar)平面板式平焊钢制管法兰
11.
Slip-on welding plate steel pipe flanges with flat face for PN 1.0MPa (10 bar)
GB/T9119.3-1988PN1.0MPa(10bar)平面板式平焊钢制管法兰
12.
Slip-on welding plate steel pipe flanges with flat face for PN 1.6MPa (16 bar)
GB/T9119.4-1988PN1.6MPa(16bar)平面板式平焊钢制管法兰
13.
Slip-on welding plate steel pipe flanges with flat face for PN 0.25MPa (2.5 bar)
GB/T9119.1-1988PN0.25MPa(2.5bar)平面板式平焊钢制管法兰
14.
By enhancing welded construction's rigidity and both side alternative surfacing, the problem of tube plate deformation was solved.
采用提高刚性和正反面交替直道堆焊等方法解决了蒙乃尔合金换热器管板堆焊的变形问题。
15.
Simulation and Control of Intermediate Temperature Planar Solid Oxide Fuel Cell Stack;
中温平板型SOFC电堆的模拟与控制
16.
The Influence of Uneven Foundation on the Deformation of Concrete Face Rockfill Dam
不平整地基对面板堆石坝变形的影响
17.
Study of Welded Pipe Seam Quality Detection and Automatic Elimination of Welded Pipe with Fault in Seam Systems;
平板焊管焊缝质量检测及缺陷焊管自动剔除系统的研究
18.
Automatic submerged arc welding is the method for medium/ thick plate welding, but it mainly to be used in flat welding and fillet welding.
埋弧自动焊是焊接中厚板常用的焊接方法,但常规用在平、角焊位置的焊接。