1.
Drive shafts modified for new location on the axle housing and because of the new doubler. Double joint added to the front drive shaft and the shaft made longer. Rear drive shaft shortened.
传动轴修改来配合分动箱放大齿轮组。改装内容包括双十字轴和加长前传动轴。后传动轴截短。
2.
"Rotary motion of the transmission main shaft carries through the propeller shaft to the differential, causing the rear wheels to rotate."
变速器主轴的旋转运动通过传动轴传递到差速器上,使后车轮转动。
3.
Separate the rear universal joint from the transfer case yoke.
从传动箱轴轭上拆下后万向节。
4.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
5.
differential drive shaft coupling
差速器传动轴联轴节
6.
When swinging transmission machine operation, the force constant rotation axis to make efforts before and axial rotation move backward.
当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。
7.
Align mark on the rear link yoke and universal joint to the mark on the transfer case yoke.
将后连接轴轭和万向节上的标志与传动箱轴轭上的标志对准。
8.
The reason the propeller shaft shortens as the angle increases is that the rear axle and differential move in a shorter arc than the propeller shaft.
当角度增加时,传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。
9.
cam shaft drive
凸轮轴传动凸轮轴传动装置
10.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
11.
motor-drive shaft and pinio
电动机传动轴和小齿轮
12.
propeller shaft pinion flange
传动轴主动齿轮凸缘
13.
two -joint inboard slip drive shaft
两万向节滑动的传动轴
14.
An intermediate shaft between the powered and driven shafts in a belt drive.
副轴，天轴传送带上介于动力轴与驱动轴之间的中间轴
15.
Mark the propeller shaft and pinion yoke, or pinion flange, for installation reference.
在传动轴和传动轴轴轭、或小齿轮轴轭上作标记，作安装的参考标志。
16.
In general, the degree in mechanical drive shaft rotation into force after a stop and then output a one-axis.
一般来说，分度传动机械在入力轴旋转一次后停止一下，然后出力轴分度一次。
17.
transfer-case to intermediate axle shaft
分动箱至中间车轴的传动轴
18.
transfer-case to front axle
分动箱至前车轴的传动轴