1.
A carbon spar of the wing has a wall made of a carbon braid.
厢房的一个碳桅杆一个碳包线做一个铸壁。
2.
APPLICATION OF HIGH STRENGTH CAST IRON TO THIN-WALLED CASTING
高强度铸铁在薄壁铸件铸造中的运用
3.
Production of thick section and high strength casting using low alloy cast iron
利用低合金铸铁生产厚壁高强度铸件的研究
4.
Study on Dimensional Accuracy of High Strength Gray Iron Cylinder Block Castings with Thin Section Thickness
高强度薄壁灰铸铁缸体铸件尺寸精度研究
5.
The Experiment Research on As-Cast High Toughness Ductile Iron Cooling Wall for Blast Furnace;
铸态高韧性球墨铸铁高炉冷却壁的试验研究
6.
Study and Application on the Cast Material of Crack Resistance Gypsum Mould and Equal Wall Thickness of Cast Mould
抗裂石膏型铸造材料及铸型等壁厚研究与应用
7.
Elimination of Shrinkage Porosity in Low Pressure Casting Large Castings with Varied Thickness
低压铸造大型壁厚不均铸件缩松的解决
8.
Design method of the vacuum die-casting mould for large-scale thin shell part
大型薄壁件真空压铸模具的设计方法
9.
Study on Thin-Wall and Low-Roughness Ceramic Shell Mould Based on EPS Process
薄壁光整消失模壳型铸造的型壳研究
10.
Structure optimization of water cooling channel of cast steel stave
高炉铸钢冷却壁冷却水管的优化研究
11.
Attached to the outside of the ladle are heavy trunnions by means of which it is lifted by an overhead crane.
铸桶外壁装有很重的耳轴，靠它可用天车把铸桶吊起来。
12.
Experiment and Production of Heavy Thick-walled Winding Barrel Casting for Crane with Spheroidal Graphite Cast Iron
大型厚壁球墨铸铁起重机卷筒铸件的试验与生产
13.
Process and Theory of Vacuum Counter-pressure Casting Thin-wall Aluminum Alloy Castings Based on Intelligent Control;
智能控制的薄壁铝合金铸件真空差压铸造工艺与理论
14.
A Study for Application of Low Pressure Casting Technology in Large Thin Wall Aircraft Casts of Aluminum Alloys;
低压铸造在大型薄壁航空铝合金铸件上的应用研究
15.
Study on Adjusted Pressure Casting Process with Electromagnetic and Vacuum for Aluminum Alloy Casting of Complicated & Thin-wall Components
复杂薄壁铝合金铸件磁动力真空调压铸造工艺研究
16.
Adaptability of Natural Yellow Loam Clay-Bonded Sand Casting Process to Thickness of Iron Castings
黄壤土天然粘土砂湿型铸造工艺对铸铁件壁厚的适应性
17.
Numerical Simulation and Optimization for Counter-pressure Casting Process of Large-scale Thin-wall Al Alloy Cylindrical Casting
大型薄壁铝合金筒体铸件差压铸造过程数值模拟与工艺优化
18.
The thermal stress on the hot side of cast ironstaves and copper staves on the same condition was analyzed.
计算了铸铁冷却壁与铜冷却壁在相同条件下热面热应力。