1.
The Three-Dimension Evaluation of Casting Surface Roughness on Basis of Digital Image Technology;
基于数字图像技术的铸造表面粗糙度三维评价
2.
The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy.
通过铸造表面合金化方法,使中锰奥氏体钢表面硬度提高。
3.
Study on the preparation of wear resistant surface cast by vacuum-full mould casting
真空实型铸造法制备表面耐磨铸件研究进展
4.
The Effect of Mold Temperature on the Accuracy and Surface Layer Structure of Ti Castings;
铸模温度对钛铸造精度及表面性能影响的实验研究
5.
Technology of Improving Surface Corrosion Resistance of Cast Aluminum Alloy
改善铸造铝合金表面耐腐蚀性能的技术
6.
Eliminating Surface Defects to Increase Quality Rate of Cast Aluminum Slab Ingot
有效消除表面缺陷 提高铝扁锭铸造成品率
7.
Surface Alloying Process Factors of Lost Foam Casting Magnesium Alloy
消失模铸造镁合金表面合金化工艺因素的研究
8.
Investigation of magnesium alloy surface composites prepared by evaporative pattern casting
消失模铸造制备镁合金表面复合材料的研究
9.
Study on Preparation of Al_2O_3-Fe Surface Composite Material by SHS-Casting Technology
利用SHS-铸造法制备Al_2O_3-Fe表面复合材料的研究
10.
Surface Quality and Structure of 7050 Aluminum Alloy by Low Frequency Electromagnetic Hot-Top Casting
低频电磁热顶铸造7050铝合金的表面质量和组织
11.
Development of Research on Metal-matrix Surface Cast Composite Materials
铸造钢铁基表面复合材料的研究及其进展
12.
Casting Technology of High Strength and Thick Section Ductile Iron Mainshaft
高强度厚大断面球墨铸铁主轴的铸造
13.
Centrifugal casting，compact structure，free from pinhole porosity and slag，smooth surface and even wall thickness.
高速离心铸造,组织致密,无砂眼、夹渣，表面光滑、壁厚均匀。
14.
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
高速离心铸造，组织致密，无砂眼、渣，表面光滑、厚均匀。
15.
Improvement of Surface Quality of Round Al Alloy Billets Cast by Semi-continuous Horizontal Process
铝及铝合金水平半连续铸造圆锭表面质量的改善
16.
Study of Surface State and Mechanical Properties of Cast γ-TiAl Alloy by Machining and Exposure at High Temperature;
铸造γ-TiAl合金机加工与热暴露表面状态及力学性能研究
17.
Study on the Structure, Performance and Forming Mechanism of Iron-base Surface Composite by Cast-singtering Technique;
铸造烧结铁基表面复合材料的组织、性能及形成机理研究
18.
Influence of Cr Addition on Microstructure and Hardness of TiC/Fe Composites Fabricated by SHS
Cr加入对SHS负压铸造钢基表面复合材料组织和性能的影响