1.
maximum design static laod on coupling device
作用在挂接装置上的最大设计静载荷
2.
maximum authorized static load on coupling device
作用在挂接装置上的最大允许静载荷
3.
maximum design static laod borne by semi-trailer towing vehicle
半挂牵引车承受的最大静载荷
4.
Optimal design of the connection structure of ellipsoidal vessel head with connecting pipe under the action of complex loads
复杂载荷作用下椭圆封头-接管连接结构的最优化设计
5.
Loading Conditions. The selection of loading conditions follows the determination of the type and magnitude of the loads that act on the structure.
荷载条件。确定了作用在结构上的荷载类型大小之后，接着要选择荷载条件。
6.
The Design on the Hanging Mechanism of Offshore CPT
海底静力触探系统悬挂解锁装置的设计
7.
Distribution Circuit Breaker A distribution circuit breaker is a device used for overload and short current protection of loads connected to a main distribution device.
配电线路开关配电线路开关是给连接在主配电设备上的负荷提供过载和短路保护的装置。
8.
The Design and Application of Double Skyline Suspension Cable Hoisting of Unusually Large Brigde
双承载缆索在特大桥吊装工程上的设计与应用
9.
The tank location for these vehicles is chosen for optimum airframe design for axial loads.
这些飞行器上的油箱位置是相对轴向载荷作最佳结构设计来选择的。
10.
The shape optimization design model for an arch dam under the action of static loads is dissolved by using the evolution strategy.
采用进化策略求解静力荷载作用下拱坝体型优化设计的数学模型。
11.
Calculation of the maximum working load of tower bolts for large-scale wind turbine
大型风力发电机组塔架联接螺栓最大工作载荷的计算
12.
Volume Optimal Design of Equi-strength Static-indeterminant Beam under a Concentrated Force;
集中载荷作用下超静定等强度梁的体积优化设计
13.
The major portion of the loading on an open frame structure consists of the drag loading.
作用在构架外露的结构物上的载荷，大部分是由拖曳载荷构成。
14.
Optimization Design for the Working Mechanism of the Loader;
装载机工作装置优化设计方法的研究
15.
The calculation of ledger maximum bending moment and deformation the even load of scaffold board and live loads above the ledger.
按照大横杆上面的脚手板和活荷载作为均布荷载计算大横杆的最大弯矩和变形。
16.
DESIGN OF ELLIPTICAL HEAD-NOZZLE STRUCTURE UNDER EXTERNAL LOADING
复杂载荷作用下的椭圆封头-接管连接加强结构设计
17.
Optimization Design of LGB680 Backhoe Loader Working Equipment
LGB680挖掘装载机装载工作装置优化设计
18.
Collapse Mechanism and Design Criterion of Steel Beam-to-Column Connection with Cantilever Beam Splicing under Cyclic Load;
带悬臂梁段拼接的梁柱连接在循环荷载作用下的破坏机理及抗震设计对策